AVSPARE.COM
parts catalog

HARNESS AS-CHASSIS 3422943 - Caterpillar


3422943 HARNESS AS-CHASSIS Caterpillar parts 312D, 312D L
Rating:
20
Alternative (cross code) number:
CA3422943
342-2943
3422943
Caterpillar 3422943 HARNESS AS-CHASSIS
Weight: 23 pounds 10 kg.

Buy HARNESS AS-CHASSIS 3422943 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3422943:

EXCAVATOR  312D   312D L   Caterpillar
Number on catalog scheme: 39
  For full view, you need register

Information:


Alternator
(1) Pulley nut. (2) Fan. (3) Shield. (5) Drive frame. (6) Rear frame. (7) Rotor. (8) Bearing. (9) Screws - three. (10) Retainer. (11) Screw. (12) Screws - four. (13) Plate. (14) Nuts - three. (15) Screw. (17) R terminal. (18) Strap. (19) Screws - two. (20) Regulator. (21) Diode trio. (22) Screw. (23) Nut. (24) Strap. (26) Nut. (27) BAT terminal. (28) Strap. (29) Screw. (31) Capacitor. (32) Screw. (33) Rectifier. (35) Stator. (36) Screws - four. (37) Field coil. (38) Bearing. (39) Collar. (40) Collar.Disassemble Alternator
The disassembly and assembly procedures are of the 3T6352 alternator. Other 20-SI alternators are similar.Start by:a. remove alternator.1. Remove pulley nut (1).2. Remove pulley and fan (2). 3. Remove shield (3). Remove four bolts (4) and separate drive frame (5) from rear frame (6). 4. Attach puller as shown. Remove drive frame (5) from rotor (7). As drive frame (5) is separated from rotor (7), collars (40) and (39) are no longer secured. Remove collars (40) and (39). 5. Remove three screws (9) and retainer (10). Use a puller to remove bearing (8) from drive frame (5). 6. Remove screw (11) at the GND terminal. Remove four screws (12) and plate (13) from rear frame (6). 7. Remove three nuts (14) and disconnect the stator leads from rectifier (33).8. Remove screw (15) at the battery terminal of rectifier (33).9. Loosen nut (16). Remove R terminal (17) and strap (18) together.10. Remove two screws (19) at the field oil terminals of regulator (20). Remove diode trio (21).11. Remove screw (22) at the ground terminal of rectifier (33). Remove nut (23) at the ground terminal of regulator (20). Remove strap (24). 12. Remove insulator (25) and loosen nut (26). Remove BAT terminal (27) and strap (28) together.13. Remove screw (29) and regulator (20). 14. Remove screw (30) and capacitor (31).15. Remove screw (32) and rectifier (33). 16. Loosen grommet (34) and remove stator (35) from rear frame (6).17. Remove four screws (36) and remove field coil (37) from rear frame (6). 18. If necessary, remove bearing (38) from rear frame (6).Assemble Alternator
Do not push on inner race of bearing (8) during installation. Damage to bearing (8) can occur. Push against the outer bearing race.
1. Install bearing (8) in drive frame (5). Install retainer (10) with three screws (9). 2. Place collar (39) on shaft of rotor (7). Insert the shaft of rotor (7) through bearing (8) in drive frame (5).3. Place collar (40) on shaft of rotor (7). 4. Install spacers and nut as shown. Fully seat the shaft of rotor (7) in bearing (8). 5. If removed, install bearing (38) in rear frame (6). Use the 1P510 Drive Group. 6. Place field coil (37) in rear frame (6). Install and tighten four screws (36). 7. Place stator (35) in rear frame (6). Position grommet (34) in indentation (41). 8. Place rectifier (33) in rear frame (6). Install and tighten screw (32).9. Place capacitor (31) in rear frame (6). Install and tighten screw

Caterpillar parts catalog:

Caterpillar parts catalog
312D L Excavator SKA00001-UP (MACHINE) POWERED BY C4.2 Engine
312D & 312D L Excavators KES00001-UP (MACHINE) POWERED BY C4.2 Engine
312D L Excavator XGK00001-UP (MACHINE) POWERED BY C4.2 Engine
312D & 312D L Excavators PHH00001-UP (MACHINE) POWERED BY C4.2 Engine


Parts harness Caterpillar catalog:

3669313 HARNESS AS-SENSOR
311D LRR, 311F LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325D,...
2677694 HARNESS AS-CONTROL
311D LRR, 312D, 312D L, 314D CR, 314D LCR, 315D L, 319D L, 319D LN
2595296 HARNESS AS-CAB
311D LRR, 312D, 312D L, 315D L, 319D L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 323D L
2677692 HARNESS AS-PUMP
311D LRR, 312D, 315D L, 319D L
2677644 HARNESS AS-QUICK COUPLER
311D LRR, 312D, 315D L, 319D, 319D L, 319D LN, 320D, 320D L, 320D LN, 323D L, 323D LN, 323D2 L, 324D, 324D LN, 325D, 325D L, 329D L, 330D L, 330D LN, 336D, 336D L, 336D2, 336D2 L, 345C, 345C L, 345D, ...
2992841 HARNESS AS-SOLENOID
311D LRR, 312D, 312D L, 315D L, 319D L, 345D, 345D L, 349D, 349D L
2510580 HARNESS AS-CONSOLE
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D ...
2594877 HARNESS AS-CONSOLE
311D LRR, 312D, 312D L, 312D2 L, 313D, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 323D L, 323D LN, 323D SA, 324D, 324D FM, 32...
3244203 HARNESS AS-ENGINE
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D L, 319D LN
4161802 HARNESS AS-HEATER & AIR COND
311D LRR, 311F LRR, 312D, 312D L, 312D2, 313D, 315D L, 318D2 L, 319D L, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 324D L, 329D, 329D L, 336D, 336D L, 336D2, 336...
3529454 HARNESS AS-MONITOR
312D, 315D L, 320D, 320D GC, 323D L, 324D, 329D, 329D L, 336D, 336D L
3508042 HARNESS AS-CAB
312D L, 315D L, 319D L, 319D LN, 345D L, 345D L VG, 349D L
3422957 HARNESS AS-PLATFORM
312D, 312D L, 315D L, 319D L, 319D LN
3366356 HARNESS AS-QUICK COUPLER
312D, 312D L, 315D L, 319D L, 319D LN, 320D, 320D L, 323D LN, 323D SA, 324D L, 329D, 329D L, 329D LN, 336D, 336D L, 336D LN, 345D, 345D L, 345D L VG, 349D L
3508257 HARNESS AS-CAB
312D, 312D L, 315D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA
3366096 HARNESS AS-LIGHTING
312D, 312D L, 315D L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D LN, 323D SA, 324D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 336D, 336D L, 336D LN, 336D2, 345D, 345D L, 345D L VG, 349D L
3508132 HARNESS AS-LIGHTING
312D, 312D L, 315D L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA, 324D L, 328D LCR, 329D, 329D L, 329D LN, 336D, 336D L, 336D LN, 336D2, 345D, 345D L, 345D L VG, 349D L
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.