3463857 HARNESS AS-WIRING Caterpillar parts
988G
Rating:
Alternative (cross code) number:
CA3463857
346-3857
3463857
CA3463857
346-3857
3463857
Weight: 1 pounds 0 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$37.99
31 Oct 2023
US: PremiumpartsWho
A-Premium A/C Suction and Discharge Line Hose Assembly Compatible with Buick Regal 1997-2004, Chevrolet Impala/Monte Carlo 2000-2003, Oldsmobile Intrigue 1998-1999, Pontiac Grand Prix 1997-2003, 3.8L
A-Premium [Vehicle Fitment]: Compatible with Buick Regal 1997-2004 V6 3.8L; Compatible with Chevrolet Impala/Monte Carlo 2000-2003 V6 3.8L; Compatible with Oldsmobile Intrigue 1998-1999 V6 3.8L; Compatible with Pontiac Grand Prix 1997-2003 V6 3.8L || [Reference Number]: HA-111426C, 10422442, 19169348, 19169411, 34-64435, 34-63857, 4811746, 4811903, T56180, 3464435, 3463857 || [Durable Construction] Four-layer hose construction can greatly resist wear and collapse, and feature wider operational temperature range, delivering outstanding performance in the most extreme conditions. || [Restore HVAC System]: Excellent fit for your vehicle's air conditioning system, ensuring that it operates at optimal levels and restoring your car's performance to new. || [12-Month Warranty]: A-Premium AC Hose Assembly comes with a 1-year unlimited-mileage warranty. This hvac line hose is the ideal choice for direct replacement. We extremely value your satisfaction and strive to provide you with a good shopping experience. If it fails, stops working or has any other problems, please get in touch with us at any time.
A-Premium [Vehicle Fitment]: Compatible with Buick Regal 1997-2004 V6 3.8L; Compatible with Chevrolet Impala/Monte Carlo 2000-2003 V6 3.8L; Compatible with Oldsmobile Intrigue 1998-1999 V6 3.8L; Compatible with Pontiac Grand Prix 1997-2003 V6 3.8L || [Reference Number]: HA-111426C, 10422442, 19169348, 19169411, 34-64435, 34-63857, 4811746, 4811903, T56180, 3464435, 3463857 || [Durable Construction] Four-layer hose construction can greatly resist wear and collapse, and feature wider operational temperature range, delivering outstanding performance in the most extreme conditions. || [Restore HVAC System]: Excellent fit for your vehicle's air conditioning system, ensuring that it operates at optimal levels and restoring your car's performance to new. || [12-Month Warranty]: A-Premium AC Hose Assembly comes with a 1-year unlimited-mileage warranty. This hvac line hose is the ideal choice for direct replacement. We extremely value your satisfaction and strive to provide you with a good shopping experience. If it fails, stops working or has any other problems, please get in touch with us at any time.
$90.85
31 Oct 2023
US: COMFORT AUTO
Omega Environmental Technologies 34-63857 Liquid Line/Hose
Omega Built to Original Equipment Specifications for Form, Fit & Function || Premium ISO/TS 16949 quality; tested to meet or exceed OEM specifications || All units are pressure tested for leaks to ensure product quality; product is backed by industry leading 1 yr warranty
Omega Built to Original Equipment Specifications for Form, Fit & Function || Premium ISO/TS 16949 quality; tested to meet or exceed OEM specifications || All units are pressure tested for leaks to ensure product quality; product is backed by industry leading 1 yr warranty
$54.93
22 Jun 2022
US: FinditParts Inc
Omega Environmental Technologies 34-63857 Liquid Line/Hose
Omega Built to Original Equipment Specifications for Form, Fit & Function || Premium ISO/TS 16949 quality; tested to meet or exceed OEM specifications || All units are pressure tested for leaks to ensure product quality; product is backed by industry leading 1 yr warranty
Omega Built to Original Equipment Specifications for Form, Fit & Function || Premium ISO/TS 16949 quality; tested to meet or exceed OEM specifications || All units are pressure tested for leaks to ensure product quality; product is backed by industry leading 1 yr warranty
For full view, you need register
Compatible equipment models: 3463857:
Information:
Removal Procedure
Note: Put identification marks on all hoses, on all hose assemblies, on wires and on all tube assemblies for installation purposes. Plug all hose assemblies and tube assemblies. This helps to keep contaminants from entering the system.
Illustration 1 g01247498
Typical example
Follow Step 1.a through Step 1.d in order to disconnect the harness assembly for the wastegate solenoid.
Slide locking tab (1) into the unlocked position.
Disconnect plug (2) from the engine wiring harness.
Cut cable straps (3). Note: Identify the position of all cable straps for installation purposes.
Remove harness assembly (4) from tube assembly (5). The harness assembly is secured to the tube assembly by plastic clips (6).
Illustration 2 g01247569
Typical example
Disconnect tube assembly (5) from wastegate solenoid (7).
Disconnect tube assembly (8) from wastegate solenoid (7). Remove tube assembly (8) from the tube assembly for the oil feed for the turbocharger. Tube assembly (8) is secured to the tube assembly for the oil feed for the turbocharger by spring clips. Note: Tube assembly (8) must be loose in order to release the tube assembly from the wastegate solenoid.
Remove bolts (9) and remove wastegate solenoid (7) from the cylinder block. Installation Procedure
Illustration 3 g01520645
Typical example
Loosely install wastegate solenoid (7) to tube assembly (5).
Loosely install tube assembly (8) to wastegate solenoid (7).
Install bolts (9). Tighten bolts (9) to a torque of 44 N m (32 lb ft).
Tighten tube assemblies (5) and (8) to a torque of 18 N m (13 lb ft).
Secure tube assembly (8) to the tube assembly for the oil feed for the turbocharger. Tube assembly (8) is secured by spring clips. Note: Ensure that the tube assemblies do not contact any other engine component.
Illustration 4 g01247498
Typical example
Follow Steps 6 through 6.d in order to connect the harness assembly for the wastegate solenoid.
Install harness assembly (4) to tube assembly (5). The harness assembly is secured to the tube assembly by plastic clips (6).
Connect plug (2) to the engine harness assembly.
Slide locking tab (1) into the locked position.
Install new cable straps (3) to the previously identified positions.
Note: Put identification marks on all hoses, on all hose assemblies, on wires and on all tube assemblies for installation purposes. Plug all hose assemblies and tube assemblies. This helps to keep contaminants from entering the system.
Illustration 1 g01247498
Typical example
Follow Step 1.a through Step 1.d in order to disconnect the harness assembly for the wastegate solenoid.
Slide locking tab (1) into the unlocked position.
Disconnect plug (2) from the engine wiring harness.
Cut cable straps (3). Note: Identify the position of all cable straps for installation purposes.
Remove harness assembly (4) from tube assembly (5). The harness assembly is secured to the tube assembly by plastic clips (6).
Illustration 2 g01247569
Typical example
Disconnect tube assembly (5) from wastegate solenoid (7).
Disconnect tube assembly (8) from wastegate solenoid (7). Remove tube assembly (8) from the tube assembly for the oil feed for the turbocharger. Tube assembly (8) is secured to the tube assembly for the oil feed for the turbocharger by spring clips. Note: Tube assembly (8) must be loose in order to release the tube assembly from the wastegate solenoid.
Remove bolts (9) and remove wastegate solenoid (7) from the cylinder block. Installation Procedure
Illustration 3 g01520645
Typical example
Loosely install wastegate solenoid (7) to tube assembly (5).
Loosely install tube assembly (8) to wastegate solenoid (7).
Install bolts (9). Tighten bolts (9) to a torque of 44 N m (32 lb ft).
Tighten tube assemblies (5) and (8) to a torque of 18 N m (13 lb ft).
Secure tube assembly (8) to the tube assembly for the oil feed for the turbocharger. Tube assembly (8) is secured by spring clips. Note: Ensure that the tube assemblies do not contact any other engine component.
Illustration 4 g01247498
Typical example
Follow Steps 6 through 6.d in order to connect the harness assembly for the wastegate solenoid.
Install harness assembly (4) to tube assembly (5). The harness assembly is secured to the tube assembly by plastic clips (6).
Connect plug (2) to the engine harness assembly.
Slide locking tab (1) into the locked position.
Install new cable straps (3) to the previously identified positions.
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
651B, 735, 740, 824C, 824G, 824G II, 825G II, 826G II, 834G, 836G, 980G, 980G II, 988G
1927805
HARNESS AS-VALVE
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 24H, 24M, 416E, 422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 44...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 24H, 24M, 416E, 422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 44...
216B3, 226B3, 236B3, 242B3, 246C, 247B3, 24M, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 272C, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 5...
1897601
HARNESS AS
988G
988G
1121761
HARNESS AS-PANEL
834G, 836G, 854G, 988G, 992G
834G, 836G, 854G, 988G, 992G
1799445
HARNESS AS-TRANSMISSION
834G, 836G, 988G
834G, 836G, 988G
1512094
HARNESS AS-STEERING
824G II, 824H, 825H, 826G II, 826H, 834G, 834H, 836G, 836H, 988G, 988H
824G II, 824H, 825H, 826G II, 826H, 834G, 834H, 836G, 836H, 988G, 988H
777G, 785D, 793B, 793C, 834G, 834H, 844H, 854G, 988F, 988F II, 988G, 988H, 990H, 990K, 992G, 992K, 993K, 994F
1533892
HARNESS AS
988G
988G
1418713
HARNESS AS-LIGHTING
834G, 834H, 836G, 836H, 988G, 988H
834G, 834H, 836G, 836H, 988G, 988H
1529832
HARNESS AS-CONTROL
834G, 836G, 988G
834G, 836G, 988G
2736469
HARNESS AS-SOLENOID
988G, 988H
988G, 988H
1587878
HARNESS AS
994D
994D