HARNESS AS-SOLENOID 3573243 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
B     2P-8260     Cylinder Liner Installer     1    
C     5P-3975     Rubber Lubricant     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Check the cylinder liner projection. Refer to Testing and Adjusting, "Cylinder Liner Projection - Inspect".
Illustration 1 g01004993
Install liner seals (3) in the respective grooves.
Apply Tooling (C) on the cylinder block liner bore surfaces and liner seals (3) .
Dip filler band (2) in clean engine oil for a moment. Install filler band (2) and install cylinder liner (1) immediately.
Illustration 2 g01005003
Use Tooling (B) to install cylinder liner (1) in the cylinder block. Ensure that any marks in relation to the cylinder liner projection are in alignment.Note: Refer to Special Instruction, SEHS9564 for more information about cylinder liner installation.End By: Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".