HARNESS AS-SENSOR 3618403 - Caterpillar

3618403 HARNESS AS-SENSOR Caterpillar parts AD30, AD45B, AD55, AD55B, R1300G, R1600G, R1700G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3618403
361-8403
3618403

Weight: 0.11 pounds 0 kg.

Buy HARNESS AS-SENSOR 3618403 Caterpillar genuine, new aftermarket tractor parts with delivery
LOAD HAUL DUMP, UNDERGROUND ART TRUCK,

This part in 2 request: Show. This information for suppliers only!

#739772 3618403

2021-10-14

#738812 3618403

2021-10-13

Compatible equipment models: 3618403:

LOAD HAUL DUMP R1300G R1600G R1700G

UNDERGROUND ART TRUCK AD30 AD45B AD55 AD55B Caterpillar

Number on catalog scheme: 6

Caterpillar 3618403 Parts scheme HARNESS AS-SENSOR

For full view, you need register

Information:

Illustration 51 g02452372
Drive pin (85) into shaft (86) far enough to remove shaft (86). Remove pin (85) from shaft (86). Remove planetary gear (87).
Remove thrust washers (88) and bearings (89) from planetary gear (87).
Repeat Step 52 and Step 53 for the remaining planetary gears.
Illustration 52 g02452500
Remove shaft (90) from planetary carrier (74). Remove bearing assembly (91) from shaft (90).
Illustration 53 g02452517
Remove seal (92) and O-ring seals (93).
Illustration 54 g02452503
Remove plates and discs (94). Remove pins (95) and springs (96). Note: Note the quantity and the order of the plates and discs for installation purposes.
Illustration 55 g02452516
Remove thrust bearing (97). Remove shaft assembly (98).
Illustration 56 g02452536
Remove retaining ring (99), sun gear (100), and bearing carrier (101).
Illustration 57 g02452539
Remove thrust bearing (102). Use Tooling (L) in order to remove planetary carrier (103). The weight of planetary carrier (103) is approximately 20 kg (44 lb).
Illustration 58 g02452541
Position planetary carrier (103) onto suitable blocking. Remove retaining ring (104). Compress lock ring (105) and remove planetary carrier (103) from ring gear (106). Note: Use suitable blocking in order to support the planetary carrier.
Illustration 59 g02452542
Illustration 60 g02400836
Drive pin (107) into shaft (108) far enough to remove shaft (108). Remove pin (107) from shaft (108). Remove planetary gear (109).
Remove thrust washers (110) and bearing (111) from planetary gear (109).
Repeat Step 62 and Step 63 for the remaining planetary gears.
Illustration 61 g02452545
Remove ring gear (112) and clutch plate (113).
Illustration 62 g02452546
Remove plates and discs (114). Remove pins (115) and springs (116). Note: Note the quantity and the order of the plates and discs for installation purposes.
Illustration 63 g02452547
Remove piston (117).
Illustration 64 g02452549
Remove ring seal (118) and ring seal (119).