HARNESS AS-CHASSIS 3656324 - Caterpillar

Illustration 1 g00101115
The operator can adjust the seat position forward or backward. The seat position can be adjusted up and down. The operator may also adjust the seat back tilt. Select the desired position in order to allow full pedal travel and full lever travel.The right console and the left console can be adjusted vertically.The seat and the consoles can also slide as one unit.
Illustration 2 g00101116
To adjust the seat suspension, turn operator weight adjustment knob (1) (if equipped) until the dial indicator shows the approximate weight of the operator. The adjustment knob has a range of 50 kg to 120 kg (110 lb to 265 lb). Turning the adjustment knob clockwise increases the reading. Turning the adjustment knob counterclockwise decreases the reading.
Illustration 3 g00101117
Turn knob (2) (if equipped) in order to tilt the left console to the desired height.Turn knob (3) (if equipped) in order to tilt the right console to the desired height.Use the two-position adjustment lever (4) in order to adjust the height of the seat. Pull up lever (4) into the first position. The angle of the seat can now be changed. Only the rear of the seat will tilt. Hold the seat in the desired position. Release the lever. To adjust the height of the seat, pull up lever (4) through the first position and into the second position. The front of the seat and the rear of the seat will raise simultaneously. The front of the seat and rear of the seat will lower simultaneously. Hold the seat in the desired position. Release the lever.To adjust the seat back tilt to the desired position, turn knob (5). To move the seat, the left console, and the right console forward or backward as one unit, pull up lever (6) and hold the lever. Hold the seat in the desired position. Release the lever in order to lock the seat, the left console, and the right console.To adjust the seat forward or backward, pull up lever (7) and hold the lever. Move the seat to the desired position. To lock the seat in the selected position, release the lever.
Illustration 4 g00101126
To adjust the angle of the armrest, operate dial (8). A dial is on the bottom of each armrest. Place the armrests in the upright position when you enter the machine or when you exit the machine.The operator can adjust the height of headrest (9) (if equipped) and the angle of the headrest. To adjust the headrest, hold the headrest with both hands. Move the headrest forward or backward and move the headrest up and down. Release the headrest when the desired position is attained. The headrest will remain in the desired position.The lumbar support is located in the back of the seat. Turn knob (10) (if equipped) counterclockwise in order to increase the force of the lumbar support. Turn the knob clockwise in order to decrease the force of the lumbar support.