HARNESS AS-ENGINE 3684962 - Caterpillar

Illustration 1 g01428420
Typical example (1) Apply 3S-6252 Sealant to the threads of the 26 plugs before assembly. (2) Apply 4C-4030 Thread Lock Compound to the internal threads of the drain valve. (3) The drain valve should not be assembled below the surface of inside wall of the case.
Illustration 2 g01435745
Typical example (4) 3T-0996 Sleeve Bearing Quantity ... 2 Inside diameter of the sleeve bearing before installation ... 50.203 0.013 mm (1.9765 0.0005 inch) Outside diameter of the sleeve bearing before installation ... 63.000 0.013 mm (2.4803 0.0005 inch) (5) 258-2305 Sleeve Bearing Quantity ... 4 Inside diameter of the sleeve bearing before installation ... 50.275 0.013 mm (1.9793 0.0005 inch) Outside diameter of the sleeve bearing before installation ... 63.067 0.013 mm (2.4829 0.0005 inch) (6) Install the sleeve bearings in order to be flush with the sides, as shown.Note: Apply 4C-5599 Anti-Seize Compound to the threads of the plug before assembly. (7) Torque for the plug ... 110 N m (80 lb ft)