AVSPARE.COM
parts catalog

HARNESS AS-ENGINE 3727359 - Caterpillar



3727359 HARNESS AS-ENGINE Caterpillar parts 300.9D HARNESS
Rating:
26
Alternative (cross code) number:
CA3727359
372-7359
3727359
Caterpillar 3727359 HARNESS AS-ENGINE

Buy HARNESS AS-ENGINE 3727359 Caterpillar genuine, new aftermarket tractor parts with delivery
MINI HYD EXCAVATOR,

Compatible equipment models: 3727359:

MINI HYD EXCAVATOR  300.9D   Caterpillar
  For full view, you need register

Information:


Illustration 1 g00787938
Six cylinder engine is shown (1) Cylinder linerNote: The 3054B naturally aspirated engine is not equipped with a cylinder liner. (2) Cylinder block 3054 and 3056 Engines Diameter of the bore for the cylinder liner ... 104.20 to 104.23 mm (4.102 to 4.104 inch) Depth of the recess for the cylinder liner flange ... 3.81 to 3.91 mm (0.150 to 0.154 inch) Diameter of the recess for the cylinder liner flange ... 107.82 to 107.95 mm (4.245 to 4.250 inch) 3054B Engine Diameter of the bore ... 103.000 to 103.025 mm (4.0551 to 4.0561 inch) Maximum permissible wear of the bore ... 0.15 mm (0.006 inch) (3) Bolt Tighten the bolts that fasten the housing for the crankshaft rear seal to the cylinder block to the following torque. ... 22 N m (16 lb ft) (4) Camshaft bearingsFour cylinder engine Diameter of the bore in the cylinder block for the number 1 camshaft bearing ... 55.56 to 55.59 mm (2.187 to 2.189 inch) Diameter of the bore in the cylinder block for the number 2 camshaft bearing ... 50.55 to 50.60 mm (1.990 to 1.992 inch) Diameter of the bore in the cylinder block for the number 3 camshaft bearing ... 50.04 to 50.09 mm (1.970 to 1.972 inch)Six cylinder engine Diameter of the bore in the cylinder block for the number 1 camshaft bearing ... 55.56 to 55.59 mm (2.187 to 2.189 inch) Diameter of the bore in the cylinder block for the number 2 camshaft bearing ... 50.55 to 50.60 mm (1.990 to 1.992 inch) Diameter of the bore in the cylinder block for the number 3 camshaft bearing ... 50.29 to 50.34 mm (1.980 to 1.982 inch) Diameter of the bore in the cylinder block for the number 4 camshaft bearing ... 50.04 to 50.09 mm (1.970 to 1.972 inch) Diameter of the bore in the camshaft bearing for the number 1 camshaft journal ... 50.79 to 50.85 mm (2.000 to 2.002 inch) (5) Bolt Tighten the bolts that fasten the housing for the crankshaft rear seal to the bridge to the following torque. ... 13 N m (10 lb ft) (6) Main bearings Bore in the cylinder block for the main bearings ... 80.416 to 80.442 mm (3.1660 to 3.1670 inch) (7) Main bearing cap boltsUse the following procedure in


Parts harness Caterpillar catalog:

4325243 HARNESS AS-LIGHTING
301.4C, 301.7D CR, 302.7D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.