HARNESS AS-CONTROL 3728282 - Caterpillar

1. Put identification on the wires for the starting motor as to their location on the starting motor. Disconnect wires (1) to the starting motor.2. Remove tube assembly (2) for clearance.3. Fasten a strap and hoist to remove the starting motor. Remove three bolts (3), starting motor (4) and gasket. The weight of the starter is 29 kg (64 lb.). The following steps are for the installation of the starting motor.4. Install gasket and starting motor (4) in position in flywheel housing. Install three bolts (3) to hold starting motor in place.5. Install tube assembly (2).6. Connect eight wires (1) to the starting motor.