HARNESS AS-WIRING 3740688 - Caterpillar

ACTION REQUIRED
****Parts Stock ****
Remove all 374-2276 and 374-2277 Ripper Lift Cylinder Groups and 377-0924 Rod Assemblies from dealer parts stock.
****Affected Product****
Refer to KENR5638, Disassembly and Assembly, "Ripper Lift Cylinder - Remove and Install", to complete this Rework Procedure.
Note: Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. Refer to the Operation and Maintenance Manual "Safety Section".
1. Remove the failed ripper lift cylinder group.
- For the left side, remove the 374-2276 Ripper Lift Cylinder Group.
- For the right side, remove the 374-2277 Ripper Lift Cylinder Group.
2. Install a new replacement ripper lift cylinder of the same part number.
Note: Replace the O-ring seals for the hose connections to ripper lift cylinder group. Replace the rod assembly bushing and cylinder assembly bushing, as needed.
SERVICE CLAIM ALLOWANCES
****Parts Stock****
Submit one claim for all parts removed from dealer parts stock.
****Affected Product****
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-6000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
6001-12000 hrs,
25-48 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 4.0-hour job
Note: An additional $100 US Dollars is allowed for lost oil during the repair.
PARTS DISPOSITION
****Parts Stock****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
****Affected Product****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.