HARNESS AS-CHASSIS 3778089 - Caterpillar

Start By:a. remove engine, transmission and transfer gearsb. separation of engine from transmission1. Remove the transmission control valve from the body of the transmission. Install tool (B) on the transmission control valve porting. 2. Remove the large O-ring seal (1) from the torque converter housing. 3. Fasten tooling (A) and a hoist to the torque converter housing.4. Remove bolts (3) that holds housings (2) and (4) together. 5. Lift torque converter (5) and housing (2) off of housing (4). 6. Put housing (2) in position on the floor with the torque converter side down.7. Remove six bolts (6) that hold the torque converter. Lift housing (2) with a hoist off of the torque converter. 8. Put the torque converter in position on a bench. Remove retainer ring (7) and cap (8). 9. Turn the torque converter over and remove twelve bolts (9). 10. Install two bolts (9) into threaded holes and use them as forcing screws to separate