HARNESS AS 3798296 - Caterpillar

SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-8000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Image1.1.1
Example of typical G3306B Engine
(1) Coolant sensor harness, connector M-C3
Coolant Jumper Harness Installation
1. Locate and disconnect Connector M-C3 on the coolant sensor harness from the SCAC coolant level sensor.
2. Connect M-C3 on the coolant sensor harness to MA-C1 on the coolant jumper harness.
3. Connect MA-C2 to the SCAC coolant level sensor.
4. Route and secure coolant jumper harness along the coolant sensor harness, engine interface harness, and generator harness.
Image1.2.1
Example of typical G3306B Engine (Y-C2 Connector)
(1) Connector Y-C2
5. Insert terminal MA-T3 of the coolant jumper harness into position 37 in the Y-C2 connector.
Image1.3.1
Example of typical G3306B Engine (G-C14 Connector)
(1) Connector G-C14
6. Insert terminal MA-T2 of the coolant jumper harness into position 37 in the G-C14 connector.
7. Route and secure coolant jumper harness along the EMCP harness.
8. Insert terminal MA-T1 of the coolant jumper harness into position 113 in the A-C1 connector.
EMCP Configuration
1. Connect Cat ET to the engine.
Image1.4.1
2. Open ?OCP configurations?.
3. Expand ?Operator Control Panel?.
Image1.5.1
4. Select ?Digital Inputs?.
5. Select ?Digital Input #2?.
Image1.6.1
6. Select ?Digital Input #2 Usage Type?.
7. Select ?System Event? from the ?New Value? dropdown box.
8. Click ?OK?.
Image1.7.1
9. Select ?Event Input Function #2 Suspect Parameter Number?.
10. Select ?Engine Aftercooler Coolant Level?.
11. Click ?OK?.
Image1.8.1
12. Set the Digital Input #2 ?Active State Configuration? to ?High?
13. Set the ?Event Input Function #2 Event Notification Delay Time? to 5 sec.