HARNESS AS-ENGINE 3981562 - Caterpillar

3981562 HARNESS AS-ENGINE Caterpillar parts C13, C15, C18

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3981562
398-1562
3981562

Weight: 3 pounds 1 kg.

Buy HARNESS AS-ENGINE 3981562 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

This part in 2 request: Show. This information for suppliers only!

#1190641 398-1562

2023-08-22

#425031 398-1562

2020-02-18

Compatible equipment models: 3981562:

GENERATOR SET C13 C15 C18 Caterpillar

For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 387-8004 Lifting Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01148045
Illustration 2 g01325993
Position rocker arm shaft assembly (4), valve rocker arms (3), and electronic unit injector rocker arms (1) as a unit with Tooling (A) on the cylinder head.Note: Apply clean engine oil to the underside of the bolt heads and the threads prior to installation.
Install bolts (2) and tighten to a torque of 55 5 N m (41 4 lb ft). Tighten bolts (2) again to a torque of 55 5 N m (41 4 lb ft). Turn bolts (2) for an additional 60 5 degrees. Tighten the bolts in the following sequence: 2, 3, 1, 4.Note: The additional 60 degrees can be attained by turning the bolt two points.
Adjust the valve lash for the inlet valves and the exhaust valves. Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust".
Adjust the electronic unit injectors. Refer to Testing and Adjusting, "Electronic Unit Injector - Adjust".End By:
Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".