HARNESS ASSEM. 3T1955 - Caterpillar

Illustration 5 g01236946
Remove filter assembly (9) .
Illustration 6 g01236947
Remove bolts (10). Remove air duct (11) .
Illustration 7 g01236948
Remove nuts (12). Position panel (13) aside.
Illustration 8 g01236949
Remove bolts (14) and plate (15). Repeat for opposite side.
Illustration 9 g01236950
Remove floor mat (16) .
Illustration 10 g01236951
Remove bolt (18) and plate (17). Repeat for opposite side.
Illustration 11 g01236952
Disconnect cable assembly (19) .
Illustration 12 g01458360
Loosen screws (21). Disconnect harness assemblies (20) .
Remove nut (23 ) and disconnect ground cable (22) .
Illustration 13 g01469939
854K
Illustration 14 g01458369
992K
Disconnect hose assemblies (24) .
Illustration 15 g01458376
Remove nuts (25). Position valve assembly (26) aside .
Illustration 16 g01458382
Note: Shut off the heater valves at the water pump before disconnecting the heater hoses.
Disconnect air conditioning hose assemblies (27). Disconnect hoses (28) .
Illustration 17 g01458970
Attach Tooling (A) and a suitable lifting device to cab (29) .
Illustration 18 g01458972
Remove bolts (30), washers (31), and pads (32). Repeat for the remaining three mounts.
Illustration 19 g01458970
Illustration 20 g01458997
Use Tooling (A) and a suitable lifting device to remove cab (29). The weight of cab (29) is approximately 1315 kg (2900 lb). Remove mount assemblies (33) .