HARNESS AS 3T7147 - Caterpillar

Illustration 1 g03110377
Table 1
Specification for 2W-9600 Turbocharger Gp    
Item     Qty     Part     Specification Description    
1     2     123-6979 V-Band Clamp     Use the following procedure to tighten the clamp:
1. Tighten the clamp to
9.5 1.0 N m (84.1 8.8 lb in).
2. Gently tap around the clamps with a soft faced hammer.
3. Again tighten the clamp to
9.5 1.0 N m (84.1 8.8 lb in).    
2     2     7W-2297 Clamp As     Use the following procedure to tighten the clamp:
1. Tighten the clamp to
14.0 1.5 N m (124.0 13.3 lb in).
2. Gently tap around the clamps with a soft faced hammer.
3. Again tighten the clamp to
14.0 1.5 N m (124.0 13.3 lb in).    
3     8     2N-2765 High Temperature Bolt     Before assembly, apply Loctite C5A copper anti-seize to the threads and bearing surfaces.    
4     8     2N-2766 Locknut     Torque to
54 5 N m (40 4 lb ft).    
5     16     6V-2751 High Temperature Bolt     Tighten the bolt to
20.0 1.5 N m (177.0 13.3 lb in).
Close ends of lock plates one time only after final engine assembly replace opened lock plates.