HARNESS AS-ENGINE 4316226 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     FT-2674     Vacuum Cap     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01450583
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g01450619
Remove bottom guard (1) .
Illustration 3 g01450596
Disconnect harness assemblies (2). Disconnect hose assemblies (4), (5), and (7) .
Remove bolts (3) and pilot valve (6) .Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     FT-2674     Vacuum Cap     1    
Illustration 4 g01450596
Position pilot valve (6) and install bolts (3) .
Connect hose assemblies (7), (5), and (4). Connect harness assemblies (2) .
Illustration 5 g01450619
Install bottom guard (1) .
Illustration 6 g01450583
Remove Tooling (A) from the hydraulic tank.