HARNESS AS-PUMP 4327418 - Caterpillar

(1) Bearing is pressed flush with the end of the housing within ... 0.05 mm ( .002 in)(2) Bearing.(3) Distance bearing is mounted from the end of the housing is ... 0.8 0.5 mm (.03 .02 in) Observe the location of the notches in the cam bearing prior to installation. See above illustration. All bearing inside diameter (ID) after installation must be 68.34 0.04 mm (2.691 .002 in). (1), (2) and (3) bearings. The bearings joint must be within 10 1 degrees of the top center. See Area A.(4) Distance from the bottom of the housing to the end of dowel ... 1.60 0.45 mm (.063 .018 in).
View A-A(5) Bearing to be pressed flush with end of housing within ... 0.05 mm (.002 in)
View B-BInstallation dimension:(6) 11.18 0.05 mm (.440 .002 in)(7) 12.77 0.06 mm (.503 .002 in)