HARNESS AS 4569835 - Caterpillar

Torque for all 1/2 in. locknuts that hold the rod ends in place on the rods ... 48 10 N m (35 7 lb.ft.)Torque for all 3/8 in. locknuts that hold the rod ends in place on the rods ... 14 4 N m (10 3 lb.ft.)(2) At assembly, apply 5P960 Multipurpose Grease to all spherical surfaces on yoke.(3) At assembly, apply 7M7260 Liquid Gasket to the common faces of cylinder and steering clutch case.(8) At assembly, apply 5P3413 Pipe Sealant to threads.(A) Dimension between steering clutch housing and head of bolt (6) ... 8.0 mm (.315 in.)Steering Clutch Adjustment
The adjustments to the left steering clutch are the same as the adjustment to the right steering clutch.1. Release the brake pedals.2. Make sure there are no bent linkages.3. Loosen nut (7) and adjust bolt (6) to obtain dimension (A) between steering clutch housing and head of bolt. Tighten nut (7).4. With lever (1) against stop, adjust the length of rod (5) so there is a clearance of 0.75 0.75 mm (.029 .029 in.) between the cam (4) and the roller on the end of the valve group.