HARNESS AS-ENGINE 4894025 - Caterpillar

1. Clearance between drive plate and pulley assembly ... 0.41 to 0.79 mm (.016 to .031 in).2. Tighten the oil fill plug to a torque of ... 8 to 12 N m (6 to 9 lb ft)3. Tighten the shaft nut to a torque of ... 34 to 40 N m (25 to 30 lb ft)Tighten new drive belt to a tension of ... 535 22 N (120 5 lb)Operate air conditioning for 30 minutes, then adjust the drive belt tension to ... 400 N (90 lb)Tighten used belt to a tension of ... 400 45 N (90 10 lb) Use a BT-33-96-4-15 Burroughs Belt Tension Gauge.Clutch 12 volt coil resistance is approximately ... 3.5 ohmsClutch 24 volt coil resistance is approximately ... 14.4 ohmsQuantity of refrigerant oil in compressor ... 118 cm3 (4 fl. oz.)