HARNESS AS-HEATER & AIR COND 5068177 - Caterpillar

Illustration 1 g03348168
Typical example
(1) Tighten the studs to the following torque. ... 18 N m (13 lb ft) (2) Tighten the nuts to the following torque. ... 44 N m (32 lb ft)Refer to table 1 for the test pressure for the wastegate actuator (3)
Table 1
Engine kW The pressure for the wastegate actuator
90 to 152 kW 60 kPa (9 psi)
153 to 186 kW 65 kPa (9.4 psi) The movement for the rod actuator ... 1 mm (0.0394 inch) (4) Tighten the bolt to the following torque. ... 33 N m (24 lb ft)
Illustration 2 g03348170
Typical example
(5) ( 6) ( 7) Tighten the bolts to the following torque. ... 22 N m (16 lb ft)
Illustration 3 g03348161
Typical example
(8) Tighten the bolts that secure the exhaust elbow (if equipped) to the following torque. ... 44 N m (32 lb ft)