HARNESS AS 5084347 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1P-0510     Driver Gp     1    
B     1P-0520     Driver Gp     1    
Illustration 1 g01379659
Lower the temperature of bearing cups (15) and (16). Use Tooling (A) in order to install bearing cups (15) and (16) into the axle housing.
Illustration 2 g01023876
Lower the temperature of the bushing. Use Tooling (A) and a suitable hammer in order to install the bushing into knuckle (13) .
Illustration 3 g01038749
Install bearing cone (14) onto knuckle (13) .
Illustration 4 g01023881
Use Tooling (A) in order to install seal (12) into knuckle (13).
Illustration 5 g01023875
Raise the temperature of bearing cone (9). Install bearing cone (9) onto pin assembly (11). Install seal (10) onto pin assembly (11). Repeat for the other pin assembly.
Illustration 6 g01023874
Use Tooling (B) and a suitable hammer in order to install bearing cup (8). Install spacer (6). Use Tooling (B) and a suitable hammer in order to install bearing cup (5). Install seal (4) into wheel flange (7) .
Illustration 7 g01023873
Install ring gear hub (2) and retaining ring (1) onto ring gear (3) .End By: Install the axle housing and the wheel flange. Refer to Disassembly and Assembly, "Axle Housing and Flange - Install".