AVSPARE.COM
parts catalog

HARNESS AS-CHASSIS 5089001 - Caterpillar



5089001 HARNESS AS-CHASSIS Caterpillar parts HARNESS
Rating:
76
Alternative (cross code) number:
CA5089001
508-9001
5089001
Caterpillar 5089001 HARNESS AS-CHASSIS
Weight: 0.42 pounds 0 kg.

Buy HARNESS AS-CHASSIS 5089001 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 5
 
  For full view, you need register

Information:


Cooling system coolant additive contains alkali. To help prevent personal injury, avoid contact with the skin and the eyes. Do not drink cooling system coolant additive.
Note: Test the Supplemental Coolant Additive (SCA) or test the SCA concentration as part of an S O S Coolant Analysis.Test the SCA Concentration
Coolant, Antifreeze and SCA
Do not exceed the recommended six percent supplemental coolant additive concentration.
Cooling system coolant additive contains alkali. To help prevent personal injury, avoid contact with the skin and the eyes. Do not drink cooling system coolant additive.
Use the 4C-9301 Coolant Conditioner Test Kit in order to check the concentration of the SCA. Refer to the Special Publication, SEBU6385, "Caterpillar On-highway Diesel Engine Fluid Recommendations" for more information.Add the SCA, If Necessary
Do not exceed the recommended amount of supplemental coolant additive concentration. Excessive supplemental coolant additive concentration can form deposits on the higher temperature surfaces of the cooling system, reducing the engine's heat transfer characteristics. Reduced heat transfer could cause cracking of the cylinder head and other high temperature components. Excessive supplemental coolant additive concentration could also result in radiator tube blockage, overheating, and/or accelerated water pump seal wear. Never use both liquid supplemental coolant additive and the spin-on element (if equipped) at the same time. The use of those additives together could result in supplemental coolant additive concentration exceeding the recommended maximum.
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.
Follow the instructions that are provided by the OEM or follow the instructions that are provided by the manufacturer of the coolant conditioner element on engines that are equipped with a coolant conditioner element.
Slowly loosen the cooling system filler cap in order to relieve the pressure. Remove the cooling system filler cap.Note: Always discard drained fluids according to local regulations.
If necessary, drain some coolant from the cooling system into a suitable container in order to allow space for the extra SCA.
Add the proper amount of SCA. Refer to Special Publication, SEBU6385, "Caterpillar On-highway Diesel Truck Engine Fluid Recommendations" for more information on SCA requirements.
Clean the cooling system filler cap. Inspect the gaskets of the cooling system filler cap. If the gaskets are damaged, replace the old cooling system filler cap with a new cooling system filler cap. Install the cooling system filler cap.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
797F Off-Highway Truck LAJ00001-UP (MACHINE) POWERED BY C175-20 Engine
793F Off-Highway Truck SSP00001-UP (MACHINE) POWERED BY C175-16 Engine


Parts harness Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.