HARNESS AS-WIRING 5139158 - Caterpillar

Illustration 2 g01704914
Front view of panelUse the following procedure for assembling the knob assembly (6) of the traction control dial:
Turn the dial from the full COUNTERCLOCKWISE position to the full CLOCKWISE position.
Find the halfway point between those two positions.
Assemble the knob assembly at that halfway point with the pointer on the knob assembly pointing straight up 12 O'CLOCK position.
Tighten the knob assembly to 1.0 0.1 N m (9 1 lb in).Left Bogie Group (3)
Illustration 3 g01695593
Front left view
Illustration 4 g01695599
View of area A (7) Torque for two nuts ... 644 N m (475 lb ft)Note: Continue to tighten the nuts (7) until the cotter pin can be inserted through two bolts and two nuts. (8) Torque for three nuts ... 609 N m (450 lb ft) (9) Torque for the bolt ... 136 N m (100 lb ft)Note: After tightening the nut, use the wire lock to lock the bolt. (10) Retracted length of the cylinder with the bearing (11) in assembled position ... 536.9 5.0 mm (21.14 0.20 inch)
Illustration 5 g01695614
View of area B (12) As required, use 1K-7019 Shim in order to flush 312-7705 Bearing Adjuster (13) with the spindle assembly: Quantity ... 1 Thickness of the shim ... 0.51 mm (0.020 inch) (14) Tighten the bolt. Turn the