HARNESS AS 5253207 - Caterpillar

Illustration 1 g00756318
Rotation of the pump is counterclockwise when the pump is viewed from the drive end.Propel pump Type ... variable displacement Displacement ... 55 cc (3.36 in3)Charge pump Type ... gerotor Displacement ... 17 cc (1.04 in3) Charge pressure relief setting ... 2000 kPa (290 psi) (1) Tighten four bolts to the following torque. ... 105 N m (77 lb ft) (2) Tighten the combination valve to the following torque. ... 90 N m (66 lb ft) (3) Limiter for the Displacement Tighten the nut to the following torque. ... 25 N m (18 lb ft) Change in displacement per turn ... 5 cc (0.31 in3) (4) Tighten six bolts to the following torque. ... 16 N m (12 lb ft) (5) Tighten four bolts to the following torque. ... 5.3 N m (3.9 lb ft) (6) Charge Pressure Relief Adjustment Tighten the adjustment plug for the shim to the following torque. ... 68 N m (50 lb ft) Tighten the locknut for the adjustable screw to the following torque. ... 51.5 N m (38 lb ft) (7) Tighten four bolts to the following torque. ... 13.5 N m (10 lb ft)
Illustration 2 g00756319
(8) Tighten three socket head bolts to the following torque. ... 13.5 N m (10 lb ft) (9) Tighten six bolts to the following torque. ... 32.5 N m (24 lb ft) (10) Tighten two nuts to the following torque. ... 24 N m (18 lb ft)Electrical Displacement Control (EDC)
Illustration 3 g00581763
(1) Pressure Control Pilot (PCP) Type ... dual coil Maximum continuous voltage ... 7.5 VDC Current in neutral ... 11 5 mA Current at full stroke ... 85 18 mA Maximum input current ... 250 mA Resistance at 21 °C (70 °F) ... 26 OhmsTighten the screw in order to secure the pressure control pilot to the housing to the following torque. ... 5 N m (44.25 lb in)Combination Valve
Illustration 4 g00581178
(1) Tighten the bypass actuator nut to the following torque. ... 40 N m (30 lb ft) (2) Main relief valve pressure setting ... 31000 kPa (4500 psi) (3) Tighten the nut to the following torque. ... 16 N m (12 lb ft)Charge Relief Valve
Illustration 5 g00581149
(1) Tighten the locknut to the following torque. ... 51 5 N m (37.5 3.5 lb ft) (2) Relief valve pressure setting ... 2415 70 kPa (350 10 psi)