HARNESS AS 5255867 - Caterpillar

Assembly Procedure
Illustration 1 g00782084
Illustration 2 g00782082
Install collar (24) on the shaft.
Apply 4C-4030 Thread Lock Compound on two set screws (25). Install bearing assembly (22) on the shaft. Tighten two set screws (25) .
Apply 4C-4030 Thread Lock Compound on two set screws (23). Position collar (24) against bearing assembly (22) and tighten three set screws (23) .
Install collar (26) on the bearing assembly and tighten three set screws (27) .
Install pipe (28) and bolt (29) .
Apply 4C-4030 Thread Lock Compound on bolt (18). Install segments (16) and (21) and bolt (18). Tighten the bolt to a torque of 102 15 N m (75 11 lb ft).
Apply 4C-4030 Thread Lock Compound on bolt (15). Install segment (20) and bolt (15). Tighten the bolt to a torque of 102 15 N m (75 11 lb ft).
Apply 4C-4030 Thread Lock Compound on bolt (17). Install segment (14) and bolt (17). Tighten the bolt to a torque of 102 15 N m (75 11 lb ft).
Apply 4C-4030 Thread Lock Compound on bolt (13). Install segment (19) and bolt (13). Tighten the bolt to a torque of 102 15 N m (75 11 lb ft).
Illustration 3 g00782081
Apply 4C-4030 Thread Lock Compound on two set screws (9). Install shield (11), spacer (10) and bearing assembly (8) on shaft (4). Tighten two set screws (9).
Illustration 4 g00782078
Install washers (5) and (6) on shaft (4) .
Install key (7) on shaft (4) .
Illustration 5 g00782076
Apply 4C-4030 Thread Lock Compound on two set screws (1). Install sprocket (3) on shaft (4). Tighten two set screws (1) .
Install retaining ring (2) .End By: Install the auger. Refer to Disassembly and Assembly, "Auger - Install".