HARNESS AS-SOLENOID 5272131 - Caterpillar

Illustration 1 g02775637
Table 1
Specification for 315-4449 Bucket Cylinder Gp and 315-4450 Bucket Cylinder Gp
Item Qty Part Specification Description
1 1 7Y-4695 Locknut Lubricate the face and the threads of the locknut (1) with 309-6932 Hydraulic Oil all around before assembly.
Torque to 11000 550 N m (8113 406 lb ft).
2 2 188-4217 Ring Lubricate the inside diameter and the outside diameter of with clean grease.
3 1 9X-3601 Seal As Lubricate the inside diameter and the outside diameter of with clean grease.
4 1 188-4218 Ring Lubricate the inside diameter and the outside diameter of with clean grease.
5 1 235-7770 Bushing During the press fit, insert the bushing (5) in the cap assembly with the tapered side first.
Inside diameter before assembly 80.12 0.02 mm (3.154 0.001 inch).
Installation depth is 9.85 0.30 mm (0.388 0.012 inch).
A 1 315-4443 Hydraulic Cylinder Bore diameter is 150.00 0.10 mm (5.906 0.004 inch).
B 1 242-6788 Rod As Diameter is 104.93 0.03 mm (4.131 0.001 inch).
C 1 Head Bore of head over two lands is 105.63 0.03 mm (4.159 0.001 inch).
6 1 228-5617 Bushing Inside diameter before assembly 100.29 0.04 mm (3.948 0.002 inch).
Installation depth is 10.0 0.3 mm (0.39 0.01 inch).
7 1 114-0760 Bushing Outside diameter before assembly 110.148 0.033 mm (4.3365 0.0013 inch).
Thickness is 2.475 0.025 mm (0.0974 0.0010 inch).
8 1 Buffer Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
9 1 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
10 1 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
11 - - Apply green Loctite 609 to the wiper seal groove before assembly.