HARNESS AS 5V6294 - Caterpillar

Illustration 1 g03758480
Table 1
Specifications for 455-6756 Angling Cylinder Gp
Item Qty Part Specification Description
1 2 287-1952 Bushing Bore before assembly is 50.81 0.02 mm (2.000 0.001 inch).
Installation depth is 1.50 0.25 mm (0.059 0.010 inch).
2 1 456-4486 Locknut Before assembly, lubricate the threads, piston face, and rod shoulder face.
Torque to 4500 450 N m (3319 332 lb ft).
3 1 455-6764 Piston Before assembly, lubricate the threads, piston face, and rod shoulder face.
A 1 455-6768 Cylinder As Bore is 110.00 0.08 mm (4.331 0.003 inch).
B 1 455-6765 Rod As Diameter is 69.930 0.038 mm (2.7531 0.0015 inch).
4 1 455-6757 Head Before assembly, lubricate the threads with clean grease.
Torque to 600 130 N m (443 96 lb ft).
Bore (C) over four lands is 70.33 0.03 mm (2.769 0.001 inch).
5 1 8C-9200 Wear Ring Inside diameter before assembly is 69.85 mm (2.750 inch).
Thickness is 1.50 0.03 mm (0.059 0.001 inch).
6 1 167-2235 Buffer Seal As Lubricate the sealing lip lightly with the lubricant that is being sealed.
7 1 167-2299 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
8 1 278-2324 Wiper Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
9 - - Before assembly, apply green Loctite 609 to the wiper seal groove.