8W9931 HARNESS AS Caterpillar parts
789
Rating:
Alternative (cross code) number:
CA8W9931
8W-9931
8W9931
CA8W9931
8W-9931
8W9931
Weight: 8 pounds 3 kg.
TRUCK,
Compatible equipment models: 8W9931:
Information:
Press either the DOWN Arrow button (11) or the UP Arrow button (9) on the right side of the Display to scroll through the Parameter Selection page list. The sliding indicator of the Non-Interactive Scroll Bar (8) will move accordingly with the page. A parameter will highlight in yellow each time the UP Arrow button or the DOWN Arrow button is pressed.Note: Pressing the Double DOWN Arrow button (6) will scroll to the bottom of the list. Pressing the Double UP Arrow button (7) will scroll to the top of the list.
When a desired parameter is highlighted in yellow, press the OK button (10) to select and set that particular parameter. The parameter will appear in the selected Performance Page area.
Repeat Steps 1 - 4 (above) to add other parameters to the Performance Page areas.Note: The newly set Selectable Parameters will not appear at the startup of the machine. Instead, the first four Default Parameters will appear on the Performance page. Selectable Parameters will need to be reset after the startup of the machine.Work Monitor
Illustration 3 g06105118
(14) DOWN Arrow button of the Interactive Scroll Bar with Sliding Indicator
Press the Interactive Scroll Bar DOWN arrow (14) to view the following parameters, if they are enabled:
Work Monitor
Auto Carry
Auto Ripper Control
Illustration 4 g06105133
(15) Work Monitor Efficiency BandThe “Work Monitor” appears on top of the screen and shows the level of power the machine is using to handle the load amount. The green area in the bar is the Efficiency Band (15), which represents the optimum performance level. Ideally, the Efficiency Band should be located in the green area of the bar.Auto Carry
Note: Ground Speed Sensor (GPS) must be installed.Note: Auto Carry must be installed.When Auto Carry Is Enabled, but NOT Selected
The "Auto Carry" box on the Display screen is a show/hide box. If "Auto Carry" is enabled but not selected, the setting will show "Not Selected".
Illustration 5 g06105317
Press the DOWN Arrow button (14) of the Interactive Scroll Bar to view more Work Monitor and Auto Carry information.
(14) DOWN Arrow button of the Interactive Scroll Bar with Sliding IndicatorWhen Autocarry Is Enabled and Selected
The "Autocarry" box on the Display screen is a show/hide box. If "Autocarry" is enabled and selected, the setting will show.Note: Activating the corresponding function on the keypad will also result in the Display automatically navigating to this screen.The "Work Monitor" bar (15) appears on top of the screen and shows the level of power the machine is using to handle the load amount. The green area in the bar represents the optimum performance level. Ideally, the efficiency band should be located in the green area of the bar.
Press the scroll bar DOWN arrow (14) to view Auto Ripper Information.
Use the Increment / Decrement Bar (16) to set the "Auto Carry Load Select Adjustment".
Illustration 6 g06105323
(15) Work Monitor Efficiency Band
(16) Increment / Decrement BarAuto Carry > Auto Carry Blade Load Factor
Use the Increment / Decrement Bar (16) to set the Auto Carry Blade Load Factor.
Press the PLUS button (+) on the right end
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
6G9462
HARNESS AS
768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B, 793C
768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B, 793C
1326469
HARNESS AS-WIRING
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797...
2495293
HARNESS AS-SENSOR
14H, 3176B, 3176C, 3196, 3406E, 3408E, 3412E, 3456, 345B, 345B II, 345B II MH, 345B L, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 365B, 365B II, 365B L, 572R II, 583T, 621B, 621G, 627...
14H, 3176B, 3176C, 3196, 3406E, 3408E, 3412E, 3456, 345B, 345B II, 345B II MH, 345B L, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 365B, 365B II, 365B L, 572R II, 583T, 621B, 621G, 627...
6T4301
HARNESS AS
784B, 785, 785B, 789, 789B, 793, 793B, 793C
784B, 785, 785B, 789, 789B, 793, 793B, 793C
8C9513
HARNESS AS-OIL
784B, 785, 785B, 789, 789B, 789C
784B, 785, 785B, 789, 789B, 789C
3622150
HARNESS AS-PANEL
785, 785B, 785C, 785D, 789, 789B, 789C, 793D
785, 785B, 785C, 785D, 789, 789B, 789C, 793D
3516553
HARNESS AS-WIRING
785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 797B
785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 797B
5T9411
HARNESS AS
789, 789B
789, 789B
5T9412
HARNESS AS
789, 789B
789, 789B
8X8717
HARNESS AS
785, 789
785, 789
8X8716
HARNESS AS
785, 789
785, 789
8W9720
HARNESS AS-ENGINE
768C, 769C, 771C
768C, 769C, 771C
8X8717
HARNESS AS
785, 789
785, 789
8X8716
HARNESS AS
785, 789
785, 789
8W8316
HARNESS AS-ENGINE
772B, 773B
772B, 773B