HARNESS AS 8Y7739 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-9758     Stand Group     2    Start By:
Remove the engine. Refer to Disassembly and Assembly, "Engine - Remove". The information is in this manual.
Illustration 1 g00314583
Note: The engine has been removed from the machine and the engine is on three stands.
Fasten an appropriate chain and a hoist to the front lifting plate on the engine. Raise the front of the engine off Tooling (A) .
Remove six bolts (1) and the hard washers from engine support (2) .
Use two persons or a hoist in order to remove engine support (2) from the engine. The weight of engine support (2) is 15 kg (33 lb) .
Illustration 2 g00314585
Remove four bolts (4) and the hard washers from engine support (3) on each side of the engine.
Remove two engine supports (3) from the engine.