HARNESS 9M8370 - Caterpillar

Illustration 1 g01023989
Press the "OK" key. By default, the "Distance Units" dialog is selected. The dialog in illustration 1 appears.
Do the following as necessary from any of the "Units" dialogs.
Press the soft key ("Distance") in order to select the distance units.
Press the soft key ("Speed") in order to select the speed units.
Press the soft key ("Grade") in order to select the grade units.
Press the soft key ("Cross Slope") in order to select the cross slope units.
Press the soft key ("Station Format") in order to select the station (chainage) format for a road design.
Press the "ESC" key in order to cancel and return to the "Setup Menu - Installation" dialog.
When any or all of the units have been set, press the "OK" key in order to save the settings and return to the "Setup Menu - Installation" dialog. You can begin to enter details such as the machine dimensions, in those units immediately.
Press the "ESC" key in order to exit the "Setup Menu - Installation" dialog.Distance
Distance values appear on the screen in the following formats.
Meters - as "m" (default for all CD550 display firmware files except for US English)
International feet - as "ft"
US survey feet - as "FT" (default for US English CD550 display firmware)Perform the following steps in order to change the distance units.
If any other unit setup dialog is shown, press the soft key ("Distance").
Use the down arrow key and the up arrow key in order to choose the required distance units.
The DXF file format does not contain any information on the units used (feet or meters). As all DXF drawing files are unitless, use the SiteVision Office software in order to ensure that the correct units are set.
Note: If you change your units, any currently displayed Site Map and Background Plan files are reloaded. Then the Site Map and Background Plan files are displayed in the new units.Speed
Speed can be