HARNESS AS-PLATFORM 9R4394 - Caterpillar

Illustration 12 g03063303
Install adapter (34). Tighten adapter (34) to a torque of 430 40 N m (320 30 lb ft).
Install pressure regulating valve (33). Tighten pressure regulating valve (33) to a torque of 60 7 N m (44 5 lb ft).
Illustration 13 g03063241
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install seat (27). ball (28), spring (29), O-ring seal (30), and plug (31). Tighten plug (31) to a torque of 48 5 N m (35 4 lb ft).
Illustration 14 g03063297
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Repeat Step 17 for plug (32).
Illustration 15 g03063119
Illustration 16 g03062997
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
If retainer assembly (26) was removed from the relief valve, install O-ring seal (24) onto retainer assembly (26).
Install retainer assembly (26) into cap (23) according to the recorded measurement.
Install O-ring seals (16) onto valve assembly (17).
Install valve (18), pin (19), spring (20), plate (21), O-ring seal (22), and cap (23). Tighten cap (23) to a torque of 100 10 N m (75 7 lb ft). Tighten nut (25) to a torque of 50 7 N m (37 5 lb ft).
Illustration 17 g03062782
Tighten relief valve (15) to a torque of 100 10 N m (75 7 lb ft).
Illustration 18 g03062741
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plug (14), screen assembly (13), spring (12), O-ring seal (11), and plug (10).
Illustration 19 g03062660
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install check valve (5), bearing sleeve (6), spring (7), O-ring seal (8), and plug (9). Tighten plug (9) to a torque of 350 30 N m (260 22 lb ft).
Illustration 20 g03062623
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install check valve (1), spring (2), O-ring seal (3), and plug (4). End By:
Install the steering control valve.