HARNESS AS 9U2767 - Caterpillar

9U2767 HARNESS AS Caterpillar parts 950F, 950F II, 966F, 966F II, 970F

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9U2767
9U-2767
9U2767

Weight: 0.50 pounds 0 kg.

Buy HARNESS AS 9U2767 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9U2767:

WHEEL LOADER 950F 950F II 966F 966F II 970F Caterpillar

Number on catalog scheme: 89

Caterpillar 9U2767 Parts scheme HARNESS AS

For full view, you need register

Information:

Illustration 10 g00640110
Remove bolts (17), the washers, and strip (18) on each side of radiator guard (14). Remove bolts (19), the washers, and shield assembly (20) on each side of the radiator guard.
Illustration 11 g00640108
Illustration 12 g00640109
Tilt the radiator guard and radiator (14). Remove bolts (21), the washers, and fan assembly (22) from the fan adapter.Tilt Back
Illustration 13 g00640101
Install Tooling (A). Use straps and a suitable lifting device to support the radiator guard and radiator (14) .
Illustration 14 g00640108
Illustration 15 g00640109
Install bolts (21), the washers, and fan assembly (22). Tilt back the radiator guard and radiator (14) .
Illustration 16 g00640110
Illustration 17 g00640107
Install bolts (19), the washers, and shield assembly (20) on each side of the radiator guard. Install bolts (17), the washers, and strip (18) on each side of radiator (14) .
Illustration 18 g00640103
Install pin (16). Install bolts (15), the nut, and the washer.
Illustration 19 g00640100
Install track shoe grouser (13) on each side of the machine. Install four bolts (12) .
Illustration 20 g00640098
Install hose (10) to the radiator. Tighten clamp (11) .
Illustration 21 g00640097
Install elbow (7) in hose (8). Tighten clamp (9) .
Illustration 22 g00640096
Install hose (6) and tighten clamp (5). Install hose (3) and tighten clamp (4) .
Illustration 23 g00640094
Connect electrical connector (2) on the left side of the machine. Install cable strap (1) .
Fill the cooling system. Refer to Operation and Maintenance Manual, SEBU7160, "Cooling System Level - Check" for the correct procedure.End By:
Install the engine side guards. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install" for the machine that is being serviced.
Install the fan guard. Refer to Disassembly and Assembly, "Fan Guard - Remove and Install" for the machine that is being serviced.
Install the hood and the dust ejector. Refer to Disassembly and Assembly, "Hood and Dust Ejector - Remove and Install" for the machine that is being serviced.