HARNESS AS 9V8886 - Caterpillar

Illustration 1 g03051437
Table 1
Specification for 7N-4869 Manual Shutoff
Item Qty Part Specification Description
- - - The shutoff group must be installed on the same side of the engine as the governor.
- - - When the shutoff group is right hand mounted, (1) "RH FRONT" should be visible from the front of the engine. When the shutoff group is left hand mounted, (2) "LH FRONT" should be visible from the front of the engine.
3 1 2H-3932 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
4 1 3K-2593 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
5 1 4B-3643 Setscrew Pull the shutoff lever until the governor linkage stops against the internal stop. Turn the adjustment setscrew until the adjustment setscrew contacts the lever. Turn the adjustment setscrew by one additional turn. Tighten the locknut.