3474025 HATCH Caterpillar parts
C13, C15, C18
Rating:
Alternative (cross code) number:
CA3474025
347-4025
3474025
CA3474025
347-4025
3474025
Weight: 0.57 pounds 0 kg.
GENERATOR SET,
Number on catalog scheme:
25
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-9082 Engine Turning Tool 1 Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Remove the piston cooling jets. Refer to Disassembly and Assembly, "Piston Cooling Jets - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01149594
Use Tooling (A) to rotate the crankshaft until the piston is at the bottom center.
Remove the carbon ridge from the top inside surface of the cylinder liner.
Inspect the connecting rod and connecting rod cap for the proper identification mark. The connecting rod and the connecting rod cap should have an etched number on the side. The number should match the cylinder number. Mark the connecting rod and the connecting rod cap, if necessary. Note: Do not stamp the connecting rod assembly. Stamping or punching the connecting rod assembly could cause the connecting rod to fracture.
Remove bolts (1) and connecting rod bearing cap (2).
Illustration 2 g01149595
Remove piston (3) and the connecting rod from the cylinder liner.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-9082 Engine Turning Tool 1 Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Remove the piston cooling jets. Refer to Disassembly and Assembly, "Piston Cooling Jets - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01149594
Use Tooling (A) to rotate the crankshaft until the piston is at the bottom center.
Remove the carbon ridge from the top inside surface of the cylinder liner.
Inspect the connecting rod and connecting rod cap for the proper identification mark. The connecting rod and the connecting rod cap should have an etched number on the side. The number should match the cylinder number. Mark the connecting rod and the connecting rod cap, if necessary. Note: Do not stamp the connecting rod assembly. Stamping or punching the connecting rod assembly could cause the connecting rod to fracture.
Remove bolts (1) and connecting rod bearing cap (2).
Illustration 2 g01149595
Remove piston (3) and the connecting rod from the cylinder liner.
Cat SIS web machinery list:
Parts hatch Caterpillar catalog:
1516702
HATCH
307B
307B
1352202
HATCH
307B
307B
7Y7257
HATCH GP
307, 311, 312, 320, 320 L, 320N
307, 311, 312, 320, 320 L, 320N
3346435
HATCH GP-ROOF
312E, 312E L, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E LN, 336E, 336E LH, 336E LN, 349E, 349E L, 349E L VG
312E, 312E L, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E LN, 336E, 336E LH, 336E LN, 349E, 349E L, 349E L VG
3729560
HATCH AS
308E CR, 314E CR
308E CR, 314E CR
3406621
HATCH AS
312D L, 312E, 315D L, 316E L, 320D, 320D RR, 320E, 320E RR
312D L, 312E, 315D L, 316E L, 320D, 320D RR, 320E, 320E RR
2597351
HATCH AS
311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D LRR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 325D, 325D L, 326...
311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D LRR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 325D, 325D L, 326...
3155314
HATCH AS
307D
307D
1892852
HATCH AS
307C, 311C
307C, 311C
6C8961
HATCH AS
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 322B LN, 325 L, 325B L, 330B L, 345B II, 345B L
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 322B LN, 325 L, 325B L, 330B L, 345B II, 345B L