0875511 HEAD Caterpillar parts
325, 325 LN
Rating:
Alternative (cross code) number:
CA0875511
087-5511
0875511
CA0875511
087-5511
0875511
Weight: 25 pounds 11 kg.
EXCAVATOR,
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 136-4149 Governor Pliers(1) 1
B 128-8827 Pin(1) 1
1U-7523 Pin Pilot(1) 1
(1) This tool is part of the 128-8822 Governor Tool Group.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: For more information on the governor, refer to Service Manual, SENR6454, "3114, 3116, & 3126 Engine Governors". The Service Manual, SENR6454 requires the use of a 1U-7326 Governor Calibration Bench. For information on reusability of components in the governor, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8434, "3100 Governor Inspection and General Information for Mechanical Governor Groups Used in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI)".
Illustration 1 g00673178
Apply lubricant to the new O-ring seal (1). Install new O-ring seal (1) in the cylinder head.
Illustration 2 g00672733
Apply lubricant to the new O-ring seal (2). Install new O-ring seal (2) on the tube assembly (5).
Illustration 3 g00672742
Install the O-ring seal and tube assembly (5) in the cylinder head.
Illustration 4 g00673180
Apply lubricant to the new O-ring seal (3). Install new O-ring seal (3) on the governor.
Illustration 5 g00673182
Place the governor in position on the engine.
Illustration 6 g00613563
Install the washers and bolts (7) that hold the governor in place.
Illustration 7 g00672755
Install clevis pin (6) in Tooling (B).
Illustration 8 g00672752
Use Tooling (B) to install clevis pin (6) and the clip.
Check the fuel setting adjustment. Refer to Testing and Adjusting, SENR5118.
Illustration 9 g00655975
Use Tooling (A) to slide tube assembly (5) into the governor.
Illustration 10 g00613071
Install clip (4).
Illustration 11 g00613041
Install oil tube assembly (1). Install tube assembly (2) and tube assembly for fuel ratio control (3), if equipped. Plug and cap all connections.
Install the governor control cable. End By:
Install the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 136-4149 Governor Pliers(1) 1
B 128-8827 Pin(1) 1
1U-7523 Pin Pilot(1) 1
(1) This tool is part of the 128-8822 Governor Tool Group.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: For more information on the governor, refer to Service Manual, SENR6454, "3114, 3116, & 3126 Engine Governors". The Service Manual, SENR6454 requires the use of a 1U-7326 Governor Calibration Bench. For information on reusability of components in the governor, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8434, "3100 Governor Inspection and General Information for Mechanical Governor Groups Used in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI)".
Illustration 1 g00673178
Apply lubricant to the new O-ring seal (1). Install new O-ring seal (1) in the cylinder head.
Illustration 2 g00672733
Apply lubricant to the new O-ring seal (2). Install new O-ring seal (2) on the tube assembly (5).
Illustration 3 g00672742
Install the O-ring seal and tube assembly (5) in the cylinder head.
Illustration 4 g00673180
Apply lubricant to the new O-ring seal (3). Install new O-ring seal (3) on the governor.
Illustration 5 g00673182
Place the governor in position on the engine.
Illustration 6 g00613563
Install the washers and bolts (7) that hold the governor in place.
Illustration 7 g00672755
Install clevis pin (6) in Tooling (B).
Illustration 8 g00672752
Use Tooling (B) to install clevis pin (6) and the clip.
Check the fuel setting adjustment. Refer to Testing and Adjusting, SENR5118.
Illustration 9 g00655975
Use Tooling (A) to slide tube assembly (5) into the governor.
Illustration 10 g00613071
Install clip (4).
Illustration 11 g00613041
Install oil tube assembly (1). Install tube assembly (2) and tube assembly for fuel ratio control (3), if equipped. Plug and cap all connections.
Install the governor control cable. End By:
Install the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install".
Caterpillar parts catalog:
Parts head Caterpillar catalog:
0990596
HEAD
307B, 311, 311B, 311C, 312, 312B, 312B L, 312C, 312C L, 313B, 314C, 320B, 320C, 320D, 320N, 322B L, 322C, 322C FM, 323D L, 324D, 324D L, 325, 325B L, 325C, 325C L, 325D, 325D L, 329D L, 330B L, 330C, ...
307B, 311, 311B, 311C, 312, 312B, 312B L, 312C, 312C L, 313B, 314C, 320B, 320C, 320D, 320N, 322B L, 322C, 322C FM, 323D L, 324D, 324D L, 325, 325B L, 325C, 325C L, 325D, 325D L, 329D L, 330B L, 330C, ...
7Y4620
HEAD
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 318B, 318C, 319C, 319D, 319D L, 319D LN, 325, 325 L, 325 LN, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, TK711, TK721, TK...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 318B, 318C, 319C, 319D, 319D L, 319D LN, 325, 325 L, 325 LN, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, TK711, TK721, TK...
7Y4202
HEAD
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2,...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2,...
5I8700
HEAD GP-MOTOR
322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 350, 375, 375 L, 5080, TK1051
322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 350, 375, 375 L, 5080, TK1051
5I8701
HEAD
322, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 350, 375, 375 L, 5080, TK1051
322, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 350, 375, 375 L, 5080, TK1051
7Y5130
HEAD
320 L, 320N, 322 FM L, 322 LN, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330B L, 350, 350 L, 5080
320 L, 320N, 322 FM L, 322 LN, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330B L, 350, 350 L, 5080
7Y4660
HEAD
320 L, 320B, 320C, 320N, 322B, 322B L, 322B LN, 322C, 323D L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 325D L, 328D LCR, 32...
320 L, 320B, 320C, 320N, 322B, 322B L, 322B LN, 322C, 323D L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 325D L, 328D LCR, 32...
6C6153
HEAD
322 LN, 322B LN, 322C, 324D, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 329D LN
322 LN, 322B LN, 322C, 324D, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 329D LN
4I8845
HEAD
320 L, 320B, 320N, 325, 325 L, 325B L
320 L, 320B, 320N, 325, 325 L, 325B L
4I6197
HEAD
325 LN
325 LN
5O8700
HEAD GP
325
325
0874745
HEAD GP-MOTOR
330, 330 FM L, 330 L, OEMS
330, 330 FM L, 330 L, OEMS
6E6351
HEAD
325 L, 330
325 L, 330
8C9427
HEAD-GRAPPLE
518, D4HTSK II, D4HTSK III, D5HTSK II
518, D4HTSK II, D4HTSK III, D5HTSK II
8C9395
HEAD-GRAPPLE
518, D4HTSK II, D4HTSK III, D5HTSK II
518, D4HTSK II, D4HTSK III, D5HTSK II
3G2612
HEAD
227
227
9T6372
HEAD
227
227
4825206
HEAD
FB221
FB221
1207317
HEAD-FRONT
320 L
320 L
1209960
HEAD-FRONT
320 L
320 L
5I8707
HEAD
320 L, 320N
320 L, 320N
5I8627
HEAD GP-MOTOR
320 L, 320N
320 L, 320N
1170231
HEAD-FRONT
115, 320 L
115, 320 L