HEAD GP-CYL -UTN 0R1914 - Caterpillar

Heating - Turn the switch to this symbol to activate.
Air Conditioning - Turn the switch to this symbol to activate.
Heating Variable (2.) - Turn the knob anywhere between LOW (left) and MAXIMUM heat (right.)
Air Conditioning Variable (3.) - Turn the knob anywhere between LOW (left) and MAXIMUM cool (right).Heating and Air Conditioning System Operation
The Heating and Air Conditioning system can perform four functions:
Heating (1.) - Turn the cooling control off. Turn the blower fan switch to FIRST, SECOND or THIRD speed. Adjust the heating control for the desired temperature.
Cooling (2.) - Turn the heating control off. Turn the blower fan switch to FIRST, SECOND or THIRD speed. Adjust the cooling control for the desired temperature.
Pressurizing (3.) - Pressure inside of the cab will help keep dust out, when heating or cooling is not desired.Turn the heating and air conditioning controls to OFF. Turn blower fan to either FIRST, SECOND or THIRD speed, depending on the volume of air needed to keep out dust.
Defogging (4.) - It is possible to use the heating system, with the air conditioning system, to remove moisture from the air in the cab. This will prevent moisture from forming on the windshield and windows.Turn on the blower fan and the air conditioning switch. Adjust both the heating and cooling knob controls until moisture level is lowered, the temperature is comfortable and windshield and side windows are free of moisture.Horn
Horn - Push the knob down to sound the front horn. The horn is used to alert people in front of the machine.Back-up Alarm (If Equipped)
Back-up Alarm - The alarm will sound when the transmission lever is in the reverse position. It is used to alert people behind the machine that it is backing up.Fuses and Circuit Breakers
Raise the battery box cover and open the fuse cover.
Always replace fuses with ones of the correct ampere rating to avoid electrical system damage.
Fuse - Replace any fuse if the element is broken and/or the circuit it is in does not function. Fuses and their ampere ratings are listed below.
Work Light Fuse (1.) - 10A
Windshield Wiper/Washer Fuse (2.) - 15A
Horn Fuse (3.) - 10A
Front Light Fuse (4.) - 10A
Back-up Alarm Fuse (5.) - 10A
Engine Starting Fuse (6.) - 15A
Hour Meter Fuse (7.) - 10A
EMS Panel/Gauges Fuse (8.) - 10A
Circuit Breaker Reset - Push the button in to reset the circuit breaker. If working properly, button will remain depressed. If button does not stay in, or comes out shortly after being reset, have appropriate electrical circuit checked.
Main Electrical System Reset (1.)
Heater and Air Blower Motor Reset (2.)Seat Adjustment
1. Push down on the seat height level lever to release the lock. Move the seat down, or allow it to rise to the desired height. Release the lever