HEAD 1026340 - Caterpillar

Illustration 1 g03851984
Table 1
Specification for 359-7628 Window Wiper Motor Gp
Item Qty Part Specification Description
1 1 - Tighten to 6.5 0.5 N m (57.5 4.4 lb in) if mounted in glass.
Tighten to 9 1 N m (80 9 lb in) if mounted in steel.
2 1 - Tighten to 6.5 0.5 N m (57.5 4.4 lb in) if mounted in glass.
Tighten to 7.5 0.5 N m (66.4 4.4 lb in) if mounted in steel.
3 1 5C-7261 Nut Use the following tightening procedure during wiper arm installation:
1. Tighten the wiper arm nut to 21 1 N m (186 9 lb in).
2. Wait for minimum 0.5 hour to maximum 4 hours.
3. Again, tighten the wiper arm nut to 21 1 N m (186 9 lb in).
Field torque check: Tighten the wiper arm nut to 12 N m (106 lb in) minimum.
A - - Wiping angle from automatic park position is 105 3 degrees.