HEAD GP-CYL 10R2108 - Caterpillar

TERMINATION DATE
31May2020
PROBLEM
The existing radiator may run at very high coolant and hydraulic oil temperatures and cause and overheat warning on certain 315F Excavators.
AFFECTED PRODUCT
Model Identification Number
315F LCR OEM FTC00101-00102, 10200-10204
315FL TDY00102-00426, 10001-11634
PARTS NEEDED
Qty
Part Number Description
4 5P5649 SEAL
1 4337186 LINER
1 5428975 RADIATOR GP-CLR
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-4000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 10.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
To rework the machine, refer to UENR6791, Disassembly and Assembly, "Radiator and Aftercooler - Remove and Install", for the procedure to remove and replace the radiator.
Note: Install a new 5P-5649 Seal and 433-7186 Liner to the bottom of the new radiator group before installation to the machine. Ensure that there are no gaps between the liner, seal, and radiator group.
Image1.1.1