HEAD 1126429 - Caterpillar

Illustration 24 g01411872
Illustration 25 g01430548
(W7) 14 mm (0.55 inch) (W8) 25 mm (0.98 inch)
Weld the corner adapters, side bar and base edge. Refer to illustration 22 to 25.
Illustration 26 g01411938
Illustration 27 g01411950
Illustration 28 g01411948
Blend in the adapter welds with a disc grinder at the front of the side bar to eliminate stress ridges, ripples or undercutting. Refer to illustrations 26 to 28.
Remove the reinforcement bars. Grind these surfaces.
Remove all debris from the welds and from the welded area.
Allow the welds to cool slowly to ambient temperature. Do not use forced air.
Illustration 29 g01430539
Illustration 30 g01430538
Check the dimensions of the bowl assembly. Refer to illustrations 29 and 30. Refer to table 7.
Table 7
    Pt. No. for the bucket     (P)     (R)     (S)    
365B
365C     267-5435    
1654 mm (65.12 inch)    
774 mm (30.47 inch)    
1950 mm (76.77 inch)    
267-5439
1654 mm (65.12 inch)    
712 mm (28.03 inch)    
1950 mm (76.77 inch)    
267-5443
1654 mm (65.12 inch)    
774 mm (30.47 inch)    
1950 mm (76.77 inch)    
385C
5090B     267-5384    
1663 mm (65.47 inch)    
874 mm (34.41 inch)    
2335 mm (91.93 inch)    
267-5394
1663 mm (65.47 inch)    
812 mm (31.97 inch)    
2465 mm (97.05 inch)    
267-5427
1663 mm (65.47 inch)    
1062 mm (41.81 inch)    
2465 mm (97.05 inch)    
267-5417
1663 mm (65.47 inch)    
711 mm (27.99 inch)    
2465 mm (97.05 inch)    
267-5408
1663 mm (65.47 inch)    
812 mm (31.97 inch)    
2465 mm (97.05 inch)    
267-5425
1663 mm (65.47 inch)    
812 mm (31.97 inch)    
2465 mm (97.05 inch)    
Align the bowl assembly where necessary.Finish
Apply primer to the repaired areas.
Allow the primer to dry completely.
Apply paint to the repaired areas.
Allow the paint to dry completely.
Illustration 31 g01412208
Illustration 32 g01412210
Install the bowl assembly onto the bucket assembly.
Install new K series tips and retainers on the adapters.
Install the side bar protectors.Note: Use only on HDR buckets.
Install the bucket onto the machine.