HEAD 1212084 - Caterpillar

Illustration 1 g00559405
The machine control pattern can be varied by changing the hydraulic hose connections. Consult your Caterpillar dealer for the procedure.The machine control pattern is initially set at the factory to the SAE system, as shown. The pattern on the left pertains to the left joystick and the pattern on the right pertains to the right joystick.
Stick Out (1) - Move the joystick to this position in order to move the stick outward.
Swing Right (2) - Move the joystick to this position in order to swing the upper structure to the right.
Stick In (3) - Move the joystick to this position in order to move the stick inward.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left.
Boom Lower (5) - Move the joystick to this position in order to lower the boom. Position (6) - This function is not used.
Boom Raise (7) - Move the joystick to this position in order to raise the boom. Position (8) - This function is not used.HOLD (9) - When you release the joysticks from any position, the joysticks will return to the HOLD. Movement of the upper structure will stop.Two functions may be performed at the same time by moving a joystick diagonally.Rotating Forest Tool
Illustration 2 g00688282
(1) Left joystick (4) Switch for counterclockwise rotation (5) Switch for clockwise rotationThe switches for rotation are located on the left joystick.
Counterclockwise Rotation of Tool (4) - Press this switch in order to rotate the tool counterclockwise.
Clockwise Rotation of Tool (5) - Press this switch in order to rotate the tool clockwise.