HEAD 1238095 - Caterpillar

1238095 HEAD Caterpillar parts D9R

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1238095
123-8095
1238095

Weight: 42 pounds 19 kg.

Information:

FLANGE SIZE 276

INSERT DIAMETER 184.07

INSERT LENGTH 28.3

INSIDE DIAMETER 82.83

PORT LOCATION 139.7

QUANTITY OF HOLES 8

PORT SIZE 19.0

Buy HEAD 1238095 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 1238095:

TRACK-TYPE TRACTOR D9R Caterpillar

Number on catalog scheme: 10

For full view, you need register

Information:

Illustration 4 g01136281
Remove retaining ring (7), washer (8), and roller bearing (9).
Illustration 5 g01178409
Illustration 6 g01178410
Remove bolt (10). Use Tooling (C) in order to remove nut (11).
Illustration 7 g01178411
Remove O-ring seal (12). Remove stub shaft (13).
Illustration 8 g01178413Note: Note the location of the alignment marks on ring gear housing (14) and the hub for assembly purposes.
Use Tooling (D) to remove ring gear housing (14).
Illustration 9 g01178412
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove the bolts, the springs, and retainers (15). Remove piston (16).
Illustration 10 g01178414
Remove O-ring seal (17), ring (18), O-ring seal (19), and ring (20).
Illustration 11 g01178415
Remove brake discs (21).
Illustration 12 g01178416
Remove O-ring seal (23). Use Tooling (D) in order to remove carrier gear (22).
Illustration 13 g01178429
Remove O-ring seal (24).
Illustration 14 g01178417
Use a suitable lifting device, Tooling (E), and Tooling (F) in order to remove bearing cone (25).
Use two people in order to remove flange (26). The weight of flange (26) is approximately 38 kg (83 lb).
Illustration 15 g01178430
Remove lip seal (27). Remove bearing cups (28).
Illustration 16 g01178418
Remove spacer (29).
Illustration 17 g01178431
Use Tooling (F) and Tooling (G) in order to remove bearing cone (30).
Illustration 18 g01178432
Attach a suitable lifting device to hub (31). The weight of hub (31) is approximately 29 kg (65 lb). Remove bolts (32) and hub (31).