HEAD GP-MOTOR 1249911 - Caterpillar

Change Oil
1. Remove the drain plug from the bottom of the planetary and allow the oil to drain.2. Install the drain plug.3. Fill the planetary with oil that meets the requirements given in "Lubricant Specifications".Propel Axle
Change Oil
1. Remove the drain plug from the bottom of the axle and allow the oil to drain.2. Install the drain plug.3. Fill the axle with oil that meets the requirements given in "Lubricant Specifications".Propel Axle Planetaries
Change Oil
1. Roll the machine until the fill/drain plug is at it's lowest level. Position the drain hole at the lowest point to completely drain the oil.2. Remove the drain plug from the planetary and allow the oil to drain.3. Roll the machine until the oil level marker is parallel to the ground.4. Fill the planetary with oil that meets the requirements given in "Lubricant Specifications".5. Install the drain plug.Rotor Chaincase
Change Oil
1. Start the engine and raise the rotor to the upper limit.2. Remove the center side access plate. Remove one bolt from the plate at the bottom of the rotor chaincase.3. Allow the oil to drain. Install the bolt in the plate on the bottom of the chaincase.4. Fill the chaincase with oil to the check plug level that meets the requirements given in "Lubricant Specifications".5. Clean and install the center side access plate.6. Repeat Steps 2 through 5 on the other chaincase.Rotor Bearings
Change Oil
1. Remove the hoses and allow the oil to drain from the hoses and reservoir.2. Attach the hoses and fill with oil.