HEAD 1537182 - Caterpillar

Illustration 1 g02892356
Table 1
Specification for 210-7082 Stick Cylinder Gp
Item Qty Part Specification Description
1 2 215-1906 Bushing During assembly, the bushings must not extend beyond either surface of the cap assembly.
Bore of the bearing before assembly is 70.329 0.020 mm (2.7689 0.0008 inch).
2 1 2J-0564 Locknut Lubricate the threads before assembly.
Torque to 2700 270 N m (1991 199 lb ft).
3 1 252-5833 Head Lubricate the threads with clean grease.
Torque to 600 130 N m (443 96 lb ft).
4 1 167-2204 Buffer Seal As Lubricate the sealing lip lightly with the lubricant that is being sealed.
5 1 167-2314 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
6 1 227-1148 Wiper Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
7 - - Before assembly, apply green Loctite 609 to the wiper seal groove.
8 2 213-6682 Bushing Bore of the bushing before assembly is 65.322 0.020 mm (2.5717 0.0008 inch).
A 1 212-0929 Cylinder As Bore is 120.65 0.08 mm (4.750 0.003 inch).
B 1 252-5833 Head Bore of the head over four lands 65.28 0.03 mm (2.570 0.001 inch).
C 1 228-8016 Rod Diameter is 64.950 0.038 mm (2.5571 0.0015 inch).