1782646 HEAD AS-UPPER Caterpillar parts
539
Rating:
Alternative (cross code) number:
CA1782646
178-2646
1782646
CA1782646
178-2646
1782646
Weight: 57 pounds 26 kg.
KNUCKLEBOOM LOADER,
Compatible equipment models: 1782646:
Information:
2. Remove air compressor coolant outlet tube (2).3. Disconnect lubrication supply tube (3) at the governor.
To prevent personal injury, release the pressure from the air reservoir before any air lines are disconnected.
4. Disconnect air compressor governor sensing hose (4) at the governor.5. Disconnect pressure air hose (5) at the air compressor.6. Disconnect air compressor air inlet tube (6) at the air compressor.7. Disconnect air compressor coolant inlet tube (7) at the air compressor.8. Fasten a nylon strap and hoist to the air compressor. The weight of the air compressor is 23 kg (51 lb).9. Remove three nuts (1) and the washers that hold the air compressor and adapter to the flywheel housing. 10. Disconnect the clip for tube (3) at the air compressor.11. Move air compressor (8), adapter (9) and tube (10) away from the flywheel housing.12. Cover the opening in the flywheel housing for the air compressor.13. Install protective covers in the coolant, air and oil openings. The following steps are for installation of the air compressor.14. Install a new O-ring seal on adapter (9), and put clean engine oil on it.15. Install a new O-ring seal on tube (10), and put clean engine oil on it.16. Remove the protective covers and place air compressor (8) and adapter (9) on the studs.17. Install three nuts (1) and the washers to hold the air compressor.18. Connect all hoses and tubes to the air compressor in their correct locations.19. Fill the cooling system with coolant. See the Maintenance Guide.
To prevent personal injury, release the pressure from the air reservoir before any air lines are disconnected.
4. Disconnect air compressor governor sensing hose (4) at the governor.5. Disconnect pressure air hose (5) at the air compressor.6. Disconnect air compressor air inlet tube (6) at the air compressor.7. Disconnect air compressor coolant inlet tube (7) at the air compressor.8. Fasten a nylon strap and hoist to the air compressor. The weight of the air compressor is 23 kg (51 lb).9. Remove three nuts (1) and the washers that hold the air compressor and adapter to the flywheel housing. 10. Disconnect the clip for tube (3) at the air compressor.11. Move air compressor (8), adapter (9) and tube (10) away from the flywheel housing.12. Cover the opening in the flywheel housing for the air compressor.13. Install protective covers in the coolant, air and oil openings. The following steps are for installation of the air compressor.14. Install a new O-ring seal on adapter (9), and put clean engine oil on it.15. Install a new O-ring seal on tube (10), and put clean engine oil on it.16. Remove the protective covers and place air compressor (8) and adapter (9) on the studs.17. Install three nuts (1) and the washers to hold the air compressor.18. Connect all hoses and tubes to the air compressor in their correct locations.19. Fill the cooling system with coolant. See the Maintenance Guide.
Caterpillar parts catalog:
Parts head Caterpillar catalog:
1747123
HEAD
539
539
1781735
HEAD
539
539
1746076
HEAD
539
539
1784714
HEAD
539
539
1784714
HEAD
539
539
1746076
HEAD
539
539
1781735
HEAD
539
539
1747123
HEAD
539
539
1610006
HEAD
550, 550B, 560B, 570, 570B, 580, 580B
550, 550B, 560B, 570, 570B, 580, 580B
1610005
HEAD
550, 550B, 560B, 570, 570B, 580, 580B
550, 550B, 560B, 570, 570B, 580, 580B
1702149
HEAD
320C, 325B L, 325D L, 330C, 345B II, MP15, S305, VHS-50, VT50
320C, 325B L, 325D L, 330C, 345B II, MP15, S305, VHS-50, VT50
1891830
HEAD
554, 564, 574, 574B
554, 564, 574, 574B
1891912
HEAD
554, 574
554, 574
1890164
HEAD
554, 574, 574B
554, 574, 574B
1889971
HEAD
554, 574, 574B
554, 574, 574B
4I8845
HEAD
320 L, 320B, 320N, 325, 325 L, 325B L
320 L, 320B, 320N, 325, 325 L, 325B L