1P1223 HEAD ASSEM. Caterpillar parts
594, 966C
Rating:
Alternative (cross code) number:
CA1P1223
1P-1223
1P1223
CA1P1223
1P-1223
1P1223
Weight: 3 pounds 1 kg.
PIPELAYER, WHEEL LOADER,
Number on catalog scheme:
22
For full view, you need register
Cat SIS web machinery list:
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 477-3194 Eyebolt AS 2 Start By:
Remove the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect all O-rings, seals, and gaskets for wear and damage. Replace if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06263843
Attach Tooling (A) and a suitable lifting device to aftercooler housing (2). The weight of aftercooler housing (2) is approximately 22 kg (48.5lb).
Remove 31 bolts (1) and aftercooler housing (2).
Illustration 2 g06263847
Attach Tooling (A) and a suitable lifting device to aftercooler housing (4). The weight of aftercooler housing (2) is approximately 27 kg (59.5 lb).
Remove 25 bolts (3) and aftercooler housing (4).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 477-3194 Eyebolt AS 2 Start By:
Remove the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect all O-rings, seals, and gaskets for wear and damage. Replace if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06263843
Attach Tooling (A) and a suitable lifting device to aftercooler housing (2). The weight of aftercooler housing (2) is approximately 22 kg (48.5lb).
Remove 31 bolts (1) and aftercooler housing (2).
Illustration 2 g06263847
Attach Tooling (A) and a suitable lifting device to aftercooler housing (4). The weight of aftercooler housing (2) is approximately 27 kg (59.5 lb).
Remove 25 bolts (3) and aftercooler housing (4).
Parts head Caterpillar catalog:
14G, 14H NA, 16G, 16H NA, 3176, 3176B, 3176C, 3196, 3304, 3306, 3306B, 3306C, 3406B, 3406C, 3406E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 611, 615C, 621, 621E, 621F, 621R, 623E, 623F, 627E, 627F, 814B...
7S6326
HEAD ASSEM.
594, D353C, D9G
594, D353C, D9G
1673C, 3306, 561C, 627, 966C, D6C
1673C, 3306, 561C, 627, 814, 966C, 977K, 980B, D5, D6C, D7F
120G, 130G, 528, 920, 930, 950, 950B, 966C
2K3739
HEAD
594, 594H, 930, 950, 955C, 955H, 966C, 977H
594, 594H, 930, 950, 955C, 955H, 966C, 977H
1P1079
HEAD ASSEM.
594, 966C
594, 966C
9J9250
HEAD
966C
966C
7J7983
HEAD
10, 8D, 955K, 977K, 988, D10, D11N, D3B, D5B, D6D
10, 8D, 955K, 977K, 988, D10, D11N, D3B, D5B, D6D
9A, 9S, D9G, D9H
6J7890
HEAD
8A, 8S, 9A, 9S
8A, 8S, 9A, 9S
5S, 6A
1M1577
HEAD
572G, 583K
572G, 583K
7J3239
HEAD
983B
983B
5J8161
HEAD
5S, 6A, 6S
5S, 6A, 6S
5S, 6A, 6S, 7A, 7S, D5B, D7G
2J1420
HEAD
5S, 6A
5S, 6A
4J3700
HEAD
14E, 6A, 966C
14E, 6A, 966C
1P1079
HEAD ASSEM.
594, 966C
594, 966C