1P7756 HEAD ASSEM. (R.H. Front-L.H. Rear) Caterpillar parts
D349
Rating:
Alternative (cross code) number:
CA1P7756
1P-7756
1P7756
CA1P7756
1P-7756
1P7756
Weight: 222 pounds 100 kg.
MARINE ENGINE,
Compatible equipment models: 1P7756:
Number on catalog scheme:
18
For full view, you need register
Information:
Note: Connect Cat Electronic Technician and enable feature Ripper Shank Lower Anti-Drift Solenoid Installation Status.
Illustration 1 g06006848
Install solenoid valve and mounting group (1) on the implement valve by using four bolts (4), four washers (5) and one O-Ring seal (6).
Illustration 2 g06006850
View of area B
Connect one end of hose assembly (3) to solenoid valve and mounting group (1) using connector assembly (2). Connect the end of hose assembly (7) that has the angled coupling to the implement valve using O-Ring seal (6), located next to the solenoid valve and mounting group (1).
Connect the other end of hose assembly (3) and other end of hose assembly (7) with O-Ring seal (8) to four half flanges at rear of tractor.Hose assembly (3) and hose assembly (7) are secured using clips and a grommet.Note: Before assembly, apply 5P-3975 Rubber Lubricant to the surface of grommet.Note: Connect the solenoid on solenoid valve and mounting group (1) to a two-pin connector on the implement valve wire harness.
Illustration 3 g06029075
Connector (A) remains not connected to any part in the area of the anti-drift valve.Procedure to Install Anti-Drift Ripper Valve on VPAT Track-Type Tractors
Table 2
Required Parts List
Item Qty Part Description
1 1 382-4092 Solenoid Valve and Mounting Gp
2 1 150-4049 Elbow As
3 4 8T-4172 Bolt
4 4 8T-4121 Hard Washer
5 2 4J-0520 O-Ring Seal
6 1 382-4188 Hose As
7 1 441-5247 Hose As
8 2 4J-5267 O-Ring Seal Note: Connect Cat Electronic Technician and enable feature Ripper Shank Lower Anti-Drift Solenoid Installation Status.
Illustration 4 g06006852
Top view of machine
Install solenoid valve and mounting group (1) on the implement valve by using four bolts (3), four washers (4) and one O-Ring seal (5).
Illustration 5 g06006853
View of area B
Connect one end of hose assembly (6) to solenoid valve and mounting group (1) using elbow assembly (2). Connect the end of hose assembly (7) that has the angled coupling to the implement valve using O-Ring seal (5), located next to the solenoid valve and mounting group (1).
Connect the other end of hose assembly (6) and other end of hose assembly (7) with O-Ring seal (8) to four half flanges at rear of tractor.Hose assembly (6) and hose assembly (7) are secured using clips, and grommet.Note: Before assembly, apply 5P-3975 Rubber Lubricant to the surface of grommet.Note: Connect the solenoid on solenoid valve and mounting group (1) to a two-pin connector on the implement valve wire harness.
Illustration 6 g06029075
Connector (A) remains not connected to any part in the area of the anti-drift valve.
Illustration 1 g06006848
Install solenoid valve and mounting group (1) on the implement valve by using four bolts (4), four washers (5) and one O-Ring seal (6).
Illustration 2 g06006850
View of area B
Connect one end of hose assembly (3) to solenoid valve and mounting group (1) using connector assembly (2). Connect the end of hose assembly (7) that has the angled coupling to the implement valve using O-Ring seal (6), located next to the solenoid valve and mounting group (1).
Connect the other end of hose assembly (3) and other end of hose assembly (7) with O-Ring seal (8) to four half flanges at rear of tractor.Hose assembly (3) and hose assembly (7) are secured using clips and a grommet.Note: Before assembly, apply 5P-3975 Rubber Lubricant to the surface of grommet.Note: Connect the solenoid on solenoid valve and mounting group (1) to a two-pin connector on the implement valve wire harness.
Illustration 3 g06029075
Connector (A) remains not connected to any part in the area of the anti-drift valve.Procedure to Install Anti-Drift Ripper Valve on VPAT Track-Type Tractors
Table 2
Required Parts List
Item Qty Part Description
1 1 382-4092 Solenoid Valve and Mounting Gp
2 1 150-4049 Elbow As
3 4 8T-4172 Bolt
4 4 8T-4121 Hard Washer
5 2 4J-0520 O-Ring Seal
6 1 382-4188 Hose As
7 1 441-5247 Hose As
8 2 4J-5267 O-Ring Seal Note: Connect Cat Electronic Technician and enable feature Ripper Shank Lower Anti-Drift Solenoid Installation Status.
Illustration 4 g06006852
Top view of machine
Install solenoid valve and mounting group (1) on the implement valve by using four bolts (3), four washers (4) and one O-Ring seal (5).
Illustration 5 g06006853
View of area B
Connect one end of hose assembly (6) to solenoid valve and mounting group (1) using elbow assembly (2). Connect the end of hose assembly (7) that has the angled coupling to the implement valve using O-Ring seal (5), located next to the solenoid valve and mounting group (1).
Connect the other end of hose assembly (6) and other end of hose assembly (7) with O-Ring seal (8) to four half flanges at rear of tractor.Hose assembly (6) and hose assembly (7) are secured using clips, and grommet.Note: Before assembly, apply 5P-3975 Rubber Lubricant to the surface of grommet.Note: Connect the solenoid on solenoid valve and mounting group (1) to a two-pin connector on the implement valve wire harness.
Illustration 6 g06029075
Connector (A) remains not connected to any part in the area of the anti-drift valve.
Caterpillar parts catalog:
Parts head Caterpillar catalog:
1P7759
HEAD ASSEM.
641B, 650B, 772, D346
641B, 650B, 772, D346
1673C, 3306, 561C, 627, 814, 966C, 977K, 980B, D5, D6C, D7F
5S3386
HEAD ASSEM.
650B, D346
650B, D346
1673C, 3306, 561C, 627, 966C, D6C
5S5137
HEAD ASSEM.
992, D348
992, D348
245, 3406, 980C
245, 3406
1P7760
HEAD ASSEM.
777, 992, D348
777, 992, D348
9L7627
HEAD ASSEM.
3160, 3208
3160, 3208
245, 3406