HEAD A.-CYL 2L4151 - Caterpillar

Table 1
Required Part List
Part Number Part Name
525-8092 Software Gp To change the engine rpm at dial 10 from 1600 rpm to 1800 rpm, perform the following steps:Note: Do not perform these steps to 311F ( (S/N: JFT1-UP), (S/N: LZF1-UP) and (S/N: KCW1-UP)) that are in Europe or in Japan. If these steps are performed, the machine will not meet the local noise regulation in Europe or in Japan.
Install the latest machine software.
Enter the main menu of the operator monitor by pressing the menu key.
Select "Service".
Enter the password.
Select "Configuration" - "Machine Attachments" - "Monitoring System Config".
Enter "4".Note: To reset the engine rpm at dial 10 to 1600 rpm, enter "0" at Step 6.The new software is available in the form of a flash file through the Caterpillar Service Information System (SIS). A newer part number may be available. SIS web only displays the latest available flash file.