HEAD 3760011 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-5255 Hydraulic Jack 1
Make sure that the shaft of the track carrier roller and the bore in the mounting bracket on the undercarriage are clean and free of dirt.
Illustration 1 g00652868
(x) Mounting bracket
Place the track carrier roller in position in the mounting bracket. The weight of track carrier roller is 17 kg (38 lb). Adjust the carrier roller until Distance (a), the distance between the outside face of the mounting bracket and the carrier roller is 7.0 0.5 mm (0.28 0.02 inch).
Illustration 2 g00693935
After you adjust the position of carrier roller (3) in the mounting bracket, tighten bolt (2).
Illustration 3 g00489356
Make sure that carrier roller (3) rotates smoothly by manually turning the carrier roller.
Slowly lower the track assembly onto the carrier roller with Tooling (A).
Tighten the tension of the track. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" for the correct procedure.