HEAD 3763927 - Caterpillar

3763927 HEAD Caterpillar parts 236D, 242D, 257D, 259D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3763927
376-3927
3763927

Weight: 2 pounds 1 kg.

Buy HEAD 3763927 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT TRACK LOADER, SKID STEER LOADER,

Compatible equipment models: 3763927:

COMPACT TRACK LOADER 259D

MULTI TERRAIN LOADER 257D

SKID STEER LOADER 236D 242D Caterpillar

Number on catalog scheme: 5

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite Graphite- 50 Anti-Seize - Start By:
Remove the accessory drive.
Remove the intake manifold.
Remove the fumes disposal group.
Remove the electronic unit injectors.
Remove the exhaust gas valve (NRS).
Remove the exhaust cooler (NRS).
Remove the exhaust manifold.
Illustration 1 g01890955
Disconnect tube assembly (1). Disconnect the tube and hose assemblies (2). Remove bolts (3) and bracket (4).
Illustration 2 g01890956
Remove tube assembly (5). Disconnect hose assembly (8).
Remove bolts (6) and nut (9). Reposition harness assembly (7).
Illustration 3 g01890957
Remove housing (10) and tube (11).
Illustration 4 g01890958
Attach a suitable lifting device to cylinder head (14). The weight of cylinder head (14) is approximately 204 kg (450 lb).
Remove bolts (12) and (13). Remove cylinder head (14) and the cylinder head gasket.Installation Procedure
Inspect the cylinder head and the cylinder block for flatness. Refer to Guideline for Reusable Parts and Salvage Operations, SEBF8162, "Procedure to Measure and Salvage Cylinder Head Assemblies and Related Components".
Install cylinder head (14) in reverse order of removal.
Install a new head gasket.
Apply Tooling (A) to the threads of bolts (12), (13), and both sides of the washers.
Install bolts (12) and (13). Refer to Guideline for Reusable Parts and Salvage Operations, SEBF8301, "Inspection and Reuse of Critical Fasteners Used in All Engines".
Illustration 5 g00950659
Tighten bolt (1) through bolt (26) in a numerical sequence to a torque of 170 10 N m (125 7 lb ft).
Tighten bolt (1) through bolt (26) again in a numerical sequence to a torque of 170 10 N m (125 7 lb ft).
Place a mark on bolt (1) through bolt (26). Rotate bolt (1) through bolt (26) in a numerical sequence for an additional 120 5 degrees (1/3 turn).
Loosen bolt (1) through bolt (26) until the washers are loose under the Bolt heads.
Tighten bolt (1) through bolt (26) in a numerical sequence to a torque of 170 10 N m (125 7 lb ft).
Tighten bolt (1) through bolt (26) again in a numerical sequence to a torque of 170 10 N m (125 7 lb ft).
Place a mark on bolt (1) through bolt (26). Rotate bolt (1) through bolt (26) in a numerical sequence for an additional 120 5 degrees (1/3 turn).
Tighten bolt (27) through bolt (34) in a numerical sequence to a torque of 55 10 N m (41 7 lb ft).