HEAD-KT-YM 3775847 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Batteries - Replace
Battery or Battery Cable - Disconnect
Engine Air Cleaner Element (Dual Element) - Clean/Replace
Engine Air Cleaner Element (Single Element) - Clean/Replace
Engine Oil and Filter - Change
Fuel System - Prime
Daily
Air Tank Moisture and Sediment - Drain
Battery Electrolyte Level - Check
Belts - Inspect/Adjust/Replace
Cooling System Coolant Level - Check
Driven Equipment - Inspect/Replace/Lubricate
Engine Air Cleaner Differential Pressure - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Clean
Engine Oil Filter Differential Pressure - Check
Engine Oil Level - Check
Fuel System Fuel Filter Differential Pressure - Check
Fuel Tank Water and Sediment - Drain
Hoses and Clamps - Inspect/Replace
Instrument Panel - Inspect
Walk-Around Inspection
Initial 250 Service Hours
Engine Valve Lash - Inspect/Adjust
Fuel Injector - Inspect/Adjust
Speed Sensor - Clean/Inspect
Every 250 Service Hours
Cooling System Coolant Sample (Level 1) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Every 500 Service Hours
Battery Electrolyte Level - Check
Every 1000 Service Hours or Every 92 Day FRA Inspection
Cooling System Coolant Sample (Level 2) - Obtain
Engine Crankcase Breather - Clean
Engine Protective Devices - Check
Fuel System Primary Filter - Clean/Inspect/Replace
Fuel System Secondary Filter - Replace
Every 2000 Service Hours or Every 184 Day FRA Inspection
Crankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine - Clean
Engine Mounts - Check
Every 3000 Service Hours
Cooling System Coolant (DEAC) - Change
Cooling System Coolant Extender (ELC) - Add
Every 4000 Service Hours or Every Yearly FRA Inspection
Air Compressor - Inspect
Engine Valve Lash - Inspect/Adjust
Fuel Injector - Inspect/Adjust
Prelube Pump - Inspect
Starting Motor - Inspect
Every 6000 Service Hours
Cooling System Coolant (ELC) - Change
Cooling System Water Temperature Regulator - Replace
Speed Sensor - Clean/Inspect
Every 8000 Service Hours or Every 2 Year FRA Inspection
Alternator - Inspect
Turbocharger - Inspect
Water Pump - Inspect
Overhaul
Aftercooler Core - Inspect/Clean