3793509 HEAD Caterpillar parts
D10T2
Rating:
Alternative (cross code) number:
CA3793509
379-3509
3793509
CA3793509
379-3509
3793509
Weight: 94 pounds 42 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Brake X Rear Brake Pads and Rotors Kit replacement for 2004-2006 Jeep TJ | AEGIS GEOMET Coated Rotors and Alpha Ceramic Brake Pads
Brake X Get The Right Fit: The rear replacement brakes and rotors kit are built for 2004 2005 2006 TJ || 6 Piece Brake Kit Replacement: Our Replacement brake Kit comes with 2 heavy duty rear rotors along with 4 automotive replacement brake pads that are built to exceed OEM Specification using quality materials for performance and long term use. || Quality That Matters: Our rotors and brake pads kit are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects and that we have your back as you make every turns. || GEOMET Protected: Our rear automotive replacement brake kits are made using heavy duty G3000 grade cast iron with a full GEOMET coating to offer just the right balance of performance, quality and durability. It’s resistant to rust and corrosion, built to exceed OEM specifications, and can be installed without any modifications. || No Noise And Low Dust: We use a ceramic formula for our brake pads, they are shimmed, chamfered and slotted to ensure smoother, quieter braking and reduce braking noise. Our automotive replacement brake rotors are double disc smoothened and mill balanced to help prevent cracking to build up. The Brake X rotors and brakes are engineered to elevate your driving experience.
Brake X Get The Right Fit: The rear replacement brakes and rotors kit are built for 2004 2005 2006 TJ || 6 Piece Brake Kit Replacement: Our Replacement brake Kit comes with 2 heavy duty rear rotors along with 4 automotive replacement brake pads that are built to exceed OEM Specification using quality materials for performance and long term use. || Quality That Matters: Our rotors and brake pads kit are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects and that we have your back as you make every turns. || GEOMET Protected: Our rear automotive replacement brake kits are made using heavy duty G3000 grade cast iron with a full GEOMET coating to offer just the right balance of performance, quality and durability. It’s resistant to rust and corrosion, built to exceed OEM specifications, and can be installed without any modifications. || No Noise And Low Dust: We use a ceramic formula for our brake pads, they are shimmed, chamfered and slotted to ensure smoother, quieter braking and reduce braking noise. Our automotive replacement brake rotors are double disc smoothened and mill balanced to help prevent cracking to build up. The Brake X rotors and brakes are engineered to elevate your driving experience.
![[Rear] Brake X Replacement Brake Pads and Rotors Kit | Aegis GEOMET Coated Rotors and Alpha Ceramic Brake Pads | Compatible with Jeep TJ 4.0 2004 2005 2006](http://c1.a2109.com/_150/aws_api/512/512t0/512t0zxbe4l.jpg)
$98.02
28 Mar 2024
US: Super Brakes
[Rear] Brake X Replacement Brake Pads and Rotors Kit | Aegis GEOMET Coated Rotors and Alpha Ceramic Brake Pads | Compatible with Jeep TJ 4.0 2004 2005 2006
Brake X Brakes and Rotors Kit Rear: Our Rear Brake Pads and Rotors Kit comes with 2 heavy duty brake rotors for the rear along with 4 ceramic brake pads. The rotors and brake pads are built to exceed OEM Specification using quality materials for performance and long term use. || Quality That Matters: Our automotive replacement brake kit are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as you make every turns. || GEOMET Protected: Our rear brakes and rotors kit is made using heavy duty G3000 grade cast iron with a GEOMET coating to offer just the right balance of performance, quality and durability. It’s resistant to rust and corrosion, built to exceed OEM specifications, and can be installed without any modifications. || No Noise And Low Dust: We use a ceramic formula for our brake pads, they are shimmed, chamfered and slotted to ensure smoother, quieter braking and reduce braking noise. Our rotors are double disc smoothened and mill balanced to help prevent cracking and build up. The Brake X Brake Pads and Rotors kit are engineered to elevate your driving experience. || Get The Right Fit: The rear replacement brake pads and rotors kit are precision cut to provide a secure and proper fit, individually inspected, and made following strict quality control guidelines to help maintain safety and deliver consistent stopping power without any fading.
Brake X Brakes and Rotors Kit Rear: Our Rear Brake Pads and Rotors Kit comes with 2 heavy duty brake rotors for the rear along with 4 ceramic brake pads. The rotors and brake pads are built to exceed OEM Specification using quality materials for performance and long term use. || Quality That Matters: Our automotive replacement brake kit are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as you make every turns. || GEOMET Protected: Our rear brakes and rotors kit is made using heavy duty G3000 grade cast iron with a GEOMET coating to offer just the right balance of performance, quality and durability. It’s resistant to rust and corrosion, built to exceed OEM specifications, and can be installed without any modifications. || No Noise And Low Dust: We use a ceramic formula for our brake pads, they are shimmed, chamfered and slotted to ensure smoother, quieter braking and reduce braking noise. Our rotors are double disc smoothened and mill balanced to help prevent cracking and build up. The Brake X Brake Pads and Rotors kit are engineered to elevate your driving experience. || Get The Right Fit: The rear replacement brake pads and rotors kit are precision cut to provide a secure and proper fit, individually inspected, and made following strict quality control guidelines to help maintain safety and deliver consistent stopping power without any fading.
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 3793509:
Information:
Removal Procedure
Start By:
Remove the brake oil cooler. Refer to Disassembly and Assembly, "Brake Oil Cooler - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Install caps and plugs on all openings in order to prevent dirt or debris from entering the system. Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: For easier assembly, mark all hose assemblies, tube assemblies, wire harnesses and cables for identification purposes.
Illustration 1 g00604369
Remove four bolts (1) that secure bonnet (2) to engine oil cooler (3). Separate bonnet (2) and the gasket from engine oil cooler (3). Remove tube (4) and bonnet (2) from engine oil cooler (3) .
Illustration 2 g00604370
Disconnect hose (5) from bypass valve (6). Remove three bolts (7) that secure bypass valve (6) to the engine. Remove bypass valve (6) and the gasket from tube (8) and the engine.
Illustration 3 g00604371
Remove four bolts (9) that secure tube (10) to engine oil cooler (3). Disconnect tube (10) from engine oil cooler (3) .
Illustration 4 g00604374
Attach a suitable lifting sling around engine oil cooler (3). Attach a suitable hoist to the lifting sling.
Illustration 5 g00604376
Remove four bolts (11) and the washers that secure tube (12) to the manifold.
Remove two bolts (13) that secure engine oil cooler (3) to the mounting bracket.
Illustration 6 g00604378
Remove two bolts (14) that secure bonnet (15) to the engine. Remove engine oil cooler (3) from the engine. The weight of the engine oil cooler is 61 kg (135 lb).
Illustration 7 g00604380
Remove eight bolts (16) that secure bonnet (15) to engine oil cooler (3) .
Illustration 8 g00604381
Remove eight bolts (17) that secure bonnet (18) to engine oil cooler (3) .
Illustration 9 g00604383
Remove bonnet (15) and gasket (19) from engine oil cooler (3). Remove O-ring seal (20) and plug (21) from bonnet (15).
Remove bonnet (18), gasket (22), tube (23), two O-ring seals (24), and flange (25) from engine oil cooler (3) .
Remove O-ring seal (26) and plug (27) from engine oil cooler (3) .
Start By:
Remove the brake oil cooler. Refer to Disassembly and Assembly, "Brake Oil Cooler - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Install caps and plugs on all openings in order to prevent dirt or debris from entering the system. Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: For easier assembly, mark all hose assemblies, tube assemblies, wire harnesses and cables for identification purposes.
Illustration 1 g00604369
Remove four bolts (1) that secure bonnet (2) to engine oil cooler (3). Separate bonnet (2) and the gasket from engine oil cooler (3). Remove tube (4) and bonnet (2) from engine oil cooler (3) .
Illustration 2 g00604370
Disconnect hose (5) from bypass valve (6). Remove three bolts (7) that secure bypass valve (6) to the engine. Remove bypass valve (6) and the gasket from tube (8) and the engine.
Illustration 3 g00604371
Remove four bolts (9) that secure tube (10) to engine oil cooler (3). Disconnect tube (10) from engine oil cooler (3) .
Illustration 4 g00604374
Attach a suitable lifting sling around engine oil cooler (3). Attach a suitable hoist to the lifting sling.
Illustration 5 g00604376
Remove four bolts (11) and the washers that secure tube (12) to the manifold.
Remove two bolts (13) that secure engine oil cooler (3) to the mounting bracket.
Illustration 6 g00604378
Remove two bolts (14) that secure bonnet (15) to the engine. Remove engine oil cooler (3) from the engine. The weight of the engine oil cooler is 61 kg (135 lb).
Illustration 7 g00604380
Remove eight bolts (16) that secure bonnet (15) to engine oil cooler (3) .
Illustration 8 g00604381
Remove eight bolts (17) that secure bonnet (18) to engine oil cooler (3) .
Illustration 9 g00604383
Remove bonnet (15) and gasket (19) from engine oil cooler (3). Remove O-ring seal (20) and plug (21) from bonnet (15).
Remove bonnet (18), gasket (22), tube (23), two O-ring seals (24), and flange (25) from engine oil cooler (3) .
Remove O-ring seal (26) and plug (27) from engine oil cooler (3) .
Caterpillar parts catalog:
Parts head Caterpillar catalog:
3291023
HEAD
3516B, 725C, 789D, 844K, 854K, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 990K, 992K, 993K, C13, C15, C18, C32, C9.3, CX31-C13I, CX31-C18I, CX35-C18I, D10T2, D11T, D6T LGP, D6T LGPPAT, D6T XL, D8T, D9T
3516B, 725C, 789D, 844K, 854K, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 990K, 992K, 993K, C13, C15, C18, C32, C9.3, CX31-C13I, CX31-C18I, CX35-C18I, D10T2, D11T, D6T LGP, D6T LGPPAT, D6T XL, D8T, D9T
6E4976
HEAD
D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
6E3667
HEAD
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
3727056
HEAD
D10T2
D10T2
3801600
HEAD
D10T2
D10T2
3727056
HEAD
D10T2
D10T2
2663497
HEAD
824K, 834K
824K, 834K
3660774
HEAD
D7E, D7E LGP
D7E, D7E LGP
3251782
HEAD
D7E, D7E LGP
D7E, D7E LGP
2669985
HEAD
824K, 825K, 826K, D7E, D7E LGP
824K, 825K, 826K, D7E, D7E LGP
7J2207
HEAD
824C, 824S
824C, 824S
7J2208
HEAD
824C, 824S
824C, 824S
4J7995
HEAD
824S, 834B
824S, 834B
7J7279
HEAD
814S, 826B
814S, 826B
5J7089
HEAD
D7G
D7G
3801600
HEAD
D10T2
D10T2